(a) of this section, compared to the national average of such results. The report cards must include— (1) The percentage of students at each achievement level reported on the NAEP in the aggregate and, for State report cards, disaggregated for each subgroup described in section 1111(c)(2) of the ESEA; and (2) The participation rates for children with disabilities and for English learners. [

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

) changes in the timing and quantity of runoff; (C) changes in groundwater recharge and discharge; and (D) any increase in— (i) the demand for water as a result of increasing temperatures; and (ii) the rate of reservoir evaporation; (3) with respect to each major reclamation river basin, analyze the extent to which

and may be issued whether or not another agency has taken any action with respect to the matter. For additional details concerning issuance of a Finding of Violation, see appendix A to part 501 of this chapter. (b) Response — (1) Right to respond. An alleged violator

and may be issued whether or not another agency has taken any action with respect to the matter. For additional details concerning issuance of a Finding of Violation, see appendix A to part 501 of this chapter. (b) Response — (1) Right to respond. An alleged violator

and may be issued whether or not another agency has taken any action with respect to the matter. For additional details concerning issuance of a Finding of Violation, see appendix A to part 501 of this chapter. (b) Response — (1) Right to respond. An alleged violator

interest since such effective date is null and void and shall not be the basis for the assertion or recognition of any interest in or right, remedy, power or privilege with respect to such property. (b) No transfer before the effective date shall be the basis for the assertion or recognition of any right, remedy, power, or privilege with respect to, or interest in, any property in which Iran has or has had an interest since the effective date unless the person with

and may be issued whether or not another agency has taken any action with respect to the matter. For additional details concerning issuance of a Finding of Violation, see appendix A to part 501 of this chapter. (b) Response — (1) Right to respond. An alleged

issued whether or not another agency has taken any action with respect to the matter. For additional details concerning issuance of a Finding of Violation, see appendix A to part 501 of this chapter. (b) Response — (1) Right to respond. An alleged violator has the right

issued whether or not another agency has taken any action with respect to the matter. For additional details concerning issuance of a Finding of Violation, see appendix A to part 501 of this chapter. (b) Response — (1) Right to respond. An alleged violator has the right

) through (H) of section 212(a)(28) of the Act may apply for the benefits of section 212(a)(28)(I)(ii) in conjunction with an application under section 249 of the Act. [47 FR 44238, Oct. 7, 1982]

(a) The requirements of subpart B of this part are applicable to all new nonroad compression-ignition engines subject to the provisions of subpart A of this part 89, pursuant to the schedule delineated in §89.102. (b) In a given model year, you may ask us to approve the use of procedures for certification, labeling, reporting, and

(a) Prior to initial use and after major repairs verify that each analyzer complies with the specifications given in Table 3 in appendix A of this subpart. (b) If a stainless steel NO2 to NO converter is used, condition all new or replacement converters. The conditioning consists of either purging the converter with air for a minimum of 4 hours or until the converter efficiency is