Part 1042 — Control of Emissions from New and In-Use Marine Compression-Ignition Engines and Vessels
Subpart A — Overview and Applicability
Subpart B — Emission Standards and Related Requirements
- § 1042.101— Exhaust emission standards for Category 1 and Category 2 engines.
- § 1042.104— Exhaust emission standards for Category 3 engines.
- § 1042.107— Evaporative emission standards.
- § 1042.110— Recording reductant use and other diagnostic functions.
- § 1042.115— Other requirements.
- § 1042.120— Emission-related warranty requirements.
- § 1042.125— Maintenance instructions.
- § 1042.130— Installation instructions for vessel manufacturers.
- § 1042.135— Labeling.
- § 1042.140— Maximum engine power, displacement, power density, and maximum in-use engine speed.
- § 1042.145— Interim provisions.
Subpart C — Certifying Engine Families
- § 1042.201— General requirements for obtaining a certificate of conformity.
- § 1042.205— Application requirements.
- § 1042.210— Preliminary approval.
- § 1042.220— Amending maintenance instructions.
- § 1042.225— Amending applications for certification.
- § 1042.230— Engine families.
- § 1042.235— Emission testing related to certification.
- § 1042.240— Demonstrating compliance with exhaust emission standards.
- § 1042.245— Deterioration factors.
- § 1042.250— Recordkeeping and reporting.
- § 1042.255— EPA decisions.
Subpart D — Testing Production-line Engines
- § 1042.301— General provisions.
- § 1042.302— Applicability of this subpart for Category 3 engines.
- § 1042.305— Preparing and testing production-line engines.
- § 1042.310— Engine selection for Category 1 and Category 2 engines.
- § 1042.315— Determining compliance.
- § 1042.320— What happens if one of my production-line engines fails to meet emission standards?
- § 1042.325— What happens if an engine family fails the production-line testing requirements?
- § 1042.330— Selling engines from an engine family with a suspended certificate of conformity.
- § 1042.335— Reinstating suspended certificates.
- § 1042.340— When may EPA revoke my certificate under this subpart and how may I sell these engines again?
- § 1042.345— Reporting.
- § 1042.350— Recordkeeping.
Subpart E — In-use Testing
Subpart F — Test Procedures
- § 1042.501— How do I run a valid emission test?
- § 1042.505— Testing engines using discrete-mode or ramped-modal duty cycles.
- § 1042.515— Test procedures related to not-to-exceed standards.
- § 1042.520— What testing must I perform to establish deterioration factors?
- § 1042.525— How do I adjust emission levels to account for infrequently regenerating aftertreatment devices?
Subpart G — Special Compliance Provisions
- § 1042.601— General compliance provisions for marine engines and vessels.
- § 1042.605— Dressing engines already certified to other standards for nonroad or heavy-duty highway engines for marine use.
- § 1042.610— Certifying auxiliary marine engines to land-based standards.
- § 1042.615— Replacement engine exemption.
- § 1042.620— Engines used solely for competition.
- § 1042.625— Special provisions for engines used in emergency applications.
- § 1042.630— Personal-use exemption.
- § 1042.635— National security exemption.
- § 1042.650— Exemptions for migratory vessels and auxiliary engines on Category 3 vessels.
- § 1042.655— Special certification provisions for Category 3 engines with aftertreatment.
- § 1042.660— Requirements for vessel manufacturers, owners, and operators.
- § 1042.670— Special provisions for gas turbine engines.
Subpart H — Averaging, Banking, and Trading for Certification
- § 1042.701— General provisions.
- § 1042.705— Generating and calculating emission credits.
- § 1042.710— Averaging emission credits.
- § 1042.715— Banking emission credits.
- § 1042.720— Trading emission credits.
- § 1042.725— Information required for the application for certification.
- § 1042.730— ABT reports.
- § 1042.735— Recordkeeping.
- § 1042.745— Noncompliance.
Subpart I — Special Provisions for Remanufactured Marine Engines
- § 1042.801— General provisions.
- § 1042.810— Requirements for owner/operators and installers during remanufacture.
- § 1042.815— Demonstrating availability.
- § 1042.820— Emission standards and required emission reductions for remanufactured engines.
- § 1042.825— Baseline determination.
- § 1042.830— Labeling.
- § 1042.835— Certification of remanufactured engines.
- § 1042.836— Marine certification of locomotive remanufacturing systems.
- § 1042.840— Application requirements for remanufactured engines.
- § 1042.845— Remanufactured engine families.
- § 1042.850— Exemptions and hardship relief.