Part 265 — Interim Status Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities
Subpart A — General
Subpart B — General Facility Standards
- § 265.10— Applicability.
- § 265.11— Identification number.
- § 265.12— Required notices.
- § 265.13— General waste analysis.
- § 265.14— Security.
- § 265.15— General inspection requirements.
- § 265.16— Personnel training.
- § 265.17— General requirements for ignitable, reactive, or incompatible wastes.
- § 265.18— Location standards.
- § 265.19— Construction quality assurance program.
Subpart C — Preparedness and Prevention
Subpart D — Contingency Plan and Emergency Procedures
Subpart E — Manifest System, Recordkeeping, and Reporting
Subpart F — Ground-Water Monitoring
Subpart G — Closure and Post-Closure
- § 265.110— Applicability.
- § 265.111— Closure performance standard.
- § 265.112— Closure plan; amendment of plan.
- § 265.113— Closure; time allowed for closure.
- § 265.114— Disposal or decontamination of equipment, structures and soils.
- § 265.115— Certification of closure.
- § 265.116— Survey plat.
- § 265.117— Post-closure care and use of property.
- § 265.118— Post-closure plan; amendment of plan.
- § 265.119— Post-closure notices.
- § 265.120— Certification of completion of post-closure care.
- § 265.121— Post-closure requirements for facilities that obtain enforceable documents in lieu of post-closure permits.
Subpart H — Financial Requirements
- § 265.140— Applicability.
- § 265.141— Definitions of terms as used in this subpart.
- § 265.142— Cost estimate for closure.
- § 265.143— Financial assurance for closure.
- § 265.144— Cost estimate for post-closure care.
- § 265.145— Financial assurance for post-closure care.
- § 265.146— Use of a mechanism for financial assurance of both closure and post-closure care.
- § 265.147— Liability requirements.
- § 265.148— Incapacity of owners or operators, guarantors, or financial institutions.
- § 265.149— Use of State-required mechanisms.
- § 265.150— State assumption of responsibility.
Subpart I — Use and Management of Containers
- § 265.170— Applicability.
- § 265.171— Condition of containers.
- § 265.172— Compatibility of waste with container.
- § 265.173— Management of containers.
- § 265.174— Inspections.
- § 265.176— Special requirements for ignitable or reactive waste.
- § 265.177— Special requirements for incompatible wastes.
- § 265.178— Air emission standards.
Subpart J — Tank Systems
- § 265.190— Applicability.
- § 265.191— Assessment of existing tank system's integrity.
- § 265.192— Design and installation of new tank systems or components.
- § 265.193— Containment and detection of releases.
- § 265.194— General operating requirements.
- § 265.195— Inspections.
- § 265.196— Response to leaks or spills and disposition of leaking or unfit-for-use tank systems.
- § 265.197— Closure and post-closure care.
- § 265.198— Special requirements for ignitable or reactive wastes.
- § 265.199— Special requirements for incompatible wastes.
- § 265.200— Waste analysis and trial tests.
- § 265.202— Air emission standards.
Subpart K — Surface Impoundments
- § 265.220— Applicability.
- § 265.221— Design and operating requirements.
- § 265.222— Action leakage rate.
- § 265.223— Containment system.
- § 265.224— Response actions.
- § 265.225— Waste analysis and trial tests.
- § 265.226— Monitoring and inspection.
- § 265.228— Closure and post-closure care.
- § 265.229— Special requirements for ignitable or reactive waste.
- § 265.230— Special requirements for incompatible wastes.
- § 265.231— Air emission standards.
Subpart L — Waste Piles
- § 265.250— Applicability.
- § 265.251— Protection from wind.
- § 265.252— Waste analysis.
- § 265.253— Containment.
- § 265.254— Design and operating requirements.
- § 265.255— Action leakage rates.
- § 265.256— Special requirements for ignitable or reactive waste.
- § 265.257— Special requirements for incompatible wastes.
- § 265.258— Closure and post-closure care.
- § 265.259— Response actions.
- § 265.260— Monitoring and inspection.
Subpart M — Land Treatment
- § 265.270— Applicability.
- § 265.272— General operating requirements.
- § 265.273— Waste analysis.
- § 265.276— Food chain crops.
- § 265.278— Unsaturated zone (zone of aeration) monitoring.
- § 265.279— Recordkeeping.
- § 265.280— Closure and post-closure.
- § 265.281— Special requirements for ignitable or reactive waste.
- § 265.282— Special requirements for incompatible wastes.
Subpart N — Landfills
- § 265.300— Applicability.
- § 265.301— Design and operating requirements.
- § 265.302— Action leakage rate.
- § 265.303— Response actions.
- § 265.304— Monitoring and inspection.
- § 265.309— Surveying and recordkeeping.
- § 265.310— Closure and post-closure care.
- § 265.312— Special requirements for ignitable or reactive waste.
- § 265.313— Special requirements for incompatible wastes.
- § 265.314— Special requirements for bulk and containerized liquids.
- § 265.315— Special requirements for containers.
- § 265.316— Disposal of small containers of hazardous waste in overpacked drums (lab packs).
Subpart O — Incinerators
Subpart P — Thermal Treatment
Subpart Q — Chemical, Physical, and Biological Treatment
Subpart R — Underground Injection
Subpart W — Drip Pads
Subpart AA — Air Emission Standards for Process Vents
Subpart BB — Air Emission Standards for Equipment Leaks
- § 265.1050— Applicability.
- § 265.1051— Definitions.
- § 265.1052— Standards: Pumps in light liquid service.
- § 265.1053— Standards: Compressors.
- § 265.1054— Standards: Pressure relief devices in gas/vapor service.
- § 265.1055— Standards: Sampling connection systems.
- § 265.1056— Standards: Open-ended valves or lines.
- § 265.1057— Standards: Valves in gas/vapor service or in light liquid service.
- § 265.1058— Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors.
- § 265.1059— Standards: Delay of repair.
- § 265.1060— Standards: Closed-vent systems and control devices.
- § 265.1061— Alternative standards for valves in gas/vapor service or in light liquid service: percentage of valves allowed to leak.
- § 265.1062— Alternative standards for valves in gas/vapor service or in light liquid service: skip period leak detection and repair.
- § 265.1063— Test methods and procedures.
- § 265.1064— Recordkeeping requirements.
Subpart CC — Air Emission Standards for Tanks, Surface Impoundments, and Containers
- § 265.1080— Applicability.
- § 265.1081— Definitions.
- § 265.1082— Schedule for implementation of air emission standards.
- § 265.1083— Standards: General.
- § 265.1084— Waste determination procedures.
- § 265.1085— Standards: Tanks.
- § 265.1086— Standards: Surface impoundments.
- § 265.1087— Standards: Containers.
- § 265.1088— Standards: Closed-vent systems and control devices.
- § 265.1089— Inspection and monitoring requirements.
- § 265.1090— Recordkeeping requirements.
Subpart DD — Containment Buildings
Subpart EE — Hazardous Waste Munitions and Explosives Storage
Subpart FF — Fees for the Electronic Hazardous Waste Manifest Program
- § 265.1300— Applicability.
- § 265.1310— Definitions applicable to this subpart.
- § 265.1311— Manifest transactions subject to fees.
- § 265.1312— User fee calculation methodology.
- § 265.1313— User fee revisions.
- § 265.1314— How to make user fee payments.
- § 265.1315— Sanctions for delinquent payments.
- § 265.1316— Informal fee dispute resolution.