40 CFR §60.2935
Verified against eCFR.gov as of June 20, 2026View official text on eCFR.gov ↗
- (a)Yes, you may conduct a repeat performance test at any time to establish new values for the operating limits. The Administrator may request a repeat performance test at any time.
- (b)For each very small municipal waste combustion unit or institutional waste incineration unit for which you opt to demonstrate continuous compliance following the requirements in § 60.2932(d), if you want to establish new operating parameter limits or establish a different waste profile, you must comply with either paragraph (b)(1) or (2) of this section.
- (1)You must conduct a new performance test of the unit using the test methods listed in table 1b to this subpart and the procedures in § 60.2922 with a waste stream representative of the new waste profile or under the new operating parameter limits.
- (2)You must identify a representative performance test that meets the requirements in § 60.2929(c). You must submit the information in § 60.2929(b)(1) and (2) to the Administrator.