40 CFR §98.226

1. (a)Nitric Acid train identification number.
2. (b)Annual process N2O emissions from each nitric acid train (metric tons).
3. (c)-(d) [Reserved]
4. (e)Annual nitric acid production from the nitric acid facility (tons, 100 percent acid basis).
5. (f)Number of nitric acid trains.
6. (g)Number of different N2O abatement technologies per nitric acid train “t”.
7. (h)Abatement technologies used (if applicable) and date of installation of abatement technology.
8. (i)-(j) [Reserved]
9. (k)Type of nitric acid process used for each nitric acid train (low, medium, high, or dual pressure).
10. (l)Number of times in the reporting year that missing data procedures were followed to measure nitric acid production (months).
11. (m)If you conducted a performance test and calculated a site-specific emissions factor according to § 98.223(a)(1), each annual report must also contain the information specified in paragraphs (m)(1) through (7) of this section.
    1. (1)[Reserved]
    2. (2)Test method used for performance test.
    3. (3)-(6) [Reserved]
    4. (7)Number of times in the reporting year that a performance test had to be repeated (number).
12. (n)If you requested Administrator approval for an alternative method of determining N2O emissions under § 98.223(a)(2), each annual report must also contain the information specified in paragraphs (n)(1) through (4) of this section.
    1. (1)Name of alternative method.
    2. (2)Description of alternative method.
    3. (3)Request date.
    4. (4)Approval date.
13. (o)[Reserved]
14. (p)[Reserved]
15. (q)Annual percent N2O emission reduction for all nitric acid trains combined.