Part 213 — Track Safety Standards
Subpart A — General
- § 213.1— Scope of part.
- § 213.3— Application.
- § 213.4— Excepted track.
- § 213.5— Responsibility for compliance.
- § 213.7— Designation of qualified persons to supervise certain renewals and inspect track.
- § 213.9— Classes of track: operating speed limits.
- § 213.11— Restoration or renewal of track under traffic conditions.
- § 213.13— Measuring track not under load.
- § 213.14— Application of requirements to curved track.
- § 213.15— Penalties.
- § 213.17— Waivers.
Subpart B — Roadbed
Subpart C — Track Geometry
Subpart D — Track Structure
- § 213.101— Scope.
- § 213.103— Ballast; general.
- § 213.109— Crossties.
- § 213.110— Gage restraint measurement systems.
- § 213.113— Defective rails.
- § 213.115— Rail end mismatch.
- § 213.118— Continuous welded rail (CWR); plan review and approval.
- § 213.119— Continuous welded rail (CWR); plan contents.
- § 213.121— Rail joints.
- § 213.122— Torch cut rail.
- § 213.123— Tie plates.
- § 213.127— Rail fastening systems.
- § 213.133— Turnouts and track crossings generally.
- § 213.135— Switches.
- § 213.137— Frogs.
- § 213.139— Spring rail frogs.
- § 213.141— Self-guarded frogs.
- § 213.143— Frog guard rails and guard faces; gage.
Subpart E — Track Appliances and Track-Related Devices
Subpart F — Inspection
- § 213.231— Scope.
- § 213.233— Visual track inspections.
- § 213.234— Automated inspection of track constructed with concrete crossties.
- § 213.235— Inspection of switches, track crossings, and lift rail assemblies or other transition devices on moveable bridges.
- § 213.237— Inspection of rail.
- § 213.238— Qualified operator.
- § 213.239— Special inspections.
- § 213.240— Continuous rail testing.
- § 213.241— Inspection records.
Subpart G — Train Operations at Track Classes 6 and Higher
- § 213.301— Scope of subpart.
- § 213.303— Responsibility for compliance.
- § 213.305— Designation of qualified individuals; general qualifications.
- § 213.307— Classes of track: operating speed limits.
- § 213.309— Restoration or renewal of track under traffic conditions.
- § 213.311— Measuring track not under load.
- § 213.313— Application of requirements to curved track.
- § 213.317— Waivers.
- § 213.319— Drainage.
- § 213.321— Vegetation.
- § 213.323— Track gage.
- § 213.327— Track alinement.
- § 213.329— Curves; elevation and speed limitations.
- § 213.331— Track surface.
- § 213.332— Combined track alinement and surface deviations.
- § 213.333— Automated vehicle-based inspection systems.
- § 213.334— Ballast; general.
- § 213.335— Crossties.
- § 213.337— Defective rails.
- § 213.339— Inspection of rail in service.
- § 213.341— Initial inspection of new rail and welds.
- § 213.343— Continuous welded rail (CWR).
- § 213.345— Vehicle/track system qualification.
- § 213.347— Automotive or railroad crossings at grade.
- § 213.349— Rail end mismatch.
- § 213.351— Rail joints.
- § 213.352— Torch cut rail.
- § 213.353— Turnouts, crossovers, and lift rail assemblies or other transition devices on moveable bridges.
- § 213.355— Frog guard rails and guard faces; gage.
- § 213.357— Derails.
- § 213.359— Track stiffness.
- § 213.361— Right of way.
- § 213.365— Visual track inspections.
- § 213.367— Special inspections.
- § 213.369— Inspection records.