40 CFR § 180.940
Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions)
June 9, 2020
CFR

Residues of the following chemical substances are exempted from the requirement of a tolerance when used in accordance with good manufacturing practice as ingredients in an antimicrobial pesticide formulation, provided that the substance is applied on a semi-permanent or permanent food-contact surface (other than being applied on food packaging) with adequate draining before contact with food.

(a) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils.

Open Table
Pesticide Chemical CAS Reg. No. Limits
Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 100 ppm
Alkylbenzene sulfonates (branched and linear) of chain lengths C10-C16, including benzenesulfonic acid, dodecyl and benzenesulfonic acid, dodecyl-, sodium salt 27176-87-0
25155-30-0
When ready for use, the end-use concentration is not to exceed 700 ppm
Allyl cylcohexylpropionate 2705-87-5 When ready for use, the end-use concentration is not to exceed 100 ppm
α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 27252-75-1; 27306-79-2; 31726-34-8; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2 None
Aluminum sulfate 10043-01-3 When ready for use, the end-use concentration is not to exceed 50 ppm
2-propen-1-aminium, N,N-dimethyl-N-propenyl-, chloride, homopolymer 26062-79-3 When ready for use, the end-use concentration is not to exceed 0.6%
Ammonium chloride 12125-02-9 When ready for use, the end-use concentration is not to exceed 48 ppm
Amylopectin, acid-hydrolyzed, 1-oxtenylbutanedioate 113894-85-2 None
Amylopectin, hydrogen 1-octadecenylbutanedioate 125109-81-1 None
Aspartic acid, N-(1,2-dicarboxyethyl)-, tetrasodium salt 144538-83-0 When ready for use, the end-use concentration is not to exceed 5000 ppm
Butryic acid 107-92-6 When ready for use, the end-use concentration is not to exceed 100 ppm
Butyl alcohol 71-36-3 When ready for use, the end-use concentration is not to exceed 100 ppm
n-Butyl benzoate 136-60-7 When ready for use, the end-use concentration is not to exceed 15,000 ppm
n-Butyl-3-hydroxybutyrate 53605-94-0 Solvent
Citral 5392-40-5 When ready for use, the end-use concentration is not to exceed 100 ppm
Citronellol 106-22-9 When ready for use, the end-use concentration is not to exceed 100 ppm
Citronellyl acetate 150-84-5 When ready for use, the end-use concentration is not to exceed 100 ppm
Copper sulfate pentahydrate 7758-99-8 When ready for use, the end-use concentration is not to exceed 80 ppm
β-Damascone, (Z)- 23726-92-3 When ready for use, the end-use concentration is not to exceed 100 ppm
Decanal 112-31-2 When ready for use, the end-use concentration is not to exceed 100 ppm
Decanoic acid 334-48-5 When ready for use, the end-use concentration is not to exceed 100 ppm
1-Decanol 112-30-1 When ready for use, the end-use concentration is not to exceed 100 ppm
(E)-4-Decenal 65405-70-1 When ready for use, the end-use concentration is not to exceed 100 ppm
D-Glucopyranose, oligomeric, decyl octyl glycosides 68515-73-1 None
1,3-dibromo-5,5-dimethylhydantoin 77-48-5 None
2,6-Dimethyl-5-heptanal 106-72-9 When ready for use, the end-use concentration is not to exceed 100 ppm
Di-n-butyl carbonate 542-52-9 When ready for use, the end-use concentration is not to exceed 15,000 ppm
2-Dodecanol, (2E)- 20407-84-5 When ready for use, the end-use concentration is not to exceed 100 ppm
Ethanol 64-17-5 None
Ethyl 2-methylbutyrate 452-79-1 When ready for use, the end-use concentration is not to exceed 100 ppm
Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt 64-02-8 None
FD&C Green No. 3 CAS Reg. No. 2353-45-9 None
FD&C Red No. 40 25956-17-6 When ready for use, the end-use concentration is not to exceed 20 ppm.
FD&C Yellow No. 5 1934-21-0 When ready for use, the end-use concentration is not to exceed 1000 ppm
(E)-Geraniol 106-24-1 When ready for use, the end-use concentration is not to exceed 100 ppm
(E)-Geraniol acetate 105-87-3 When ready for use, the end-use concentration is not to exceed 100 ppm
C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 When ready for use, the end-use concentration is not to exceed 500 ppm.
D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, None
D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) None
D-glucurono-6-deoxy-L-manno-D-glucan, acetate, calcium magnesium potassium sodium salt (diutan gum) (CAS No. 595585-15-2) None
Heptanal 111-71-7 When ready for use, the end-use concentration is not to exceed 100 ppm
Heptanoic acid 111-14-8 When ready for use, the end-use concentration is not to exceed 100 ppm
Heptyl alcohol 111-70-6 When ready for use, the end-use concentration is not to exceed 100 ppm
Hexanal 66-25-1 When ready for use, the end-use concentration is not to exceed 100 ppm
Hexanoic acid 142-62-1 When ready for use, the end-use concentration is not to exceed 100 ppm
n-Hexanol 111-27-3 When ready for use, the end-use concentration is not to exceed 100 ppm
(Z)-3-Hexenol 928-96-1 When ready for use, the end-use concentration is not to exceed 100 ppm
(Z)-3-Hexenol acetate 3681-71-8 When ready for use, the end-use concentration is not to exceed 100 ppm
Hexyl acetate 142-92-7 When ready for use, the end-use concentration is not to exceed 100 ppm
Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 91 ppm
Hypochlorous acid, sodium salt 7681-52-9 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Isopropyl-3-hydroxybutyrate 54074-94-1 Solvent
Lactic acid 50-21-5 When ready for use, the end-use concentration is not to exceed 10,000 ppm in antimicrobial formulations applied to food-contact surfaces in public eating places
Lauric acid 143-07-7 When ready for use, the end-use concentration is not to exceed 100 ppm
Lauric aldehyde 112-54-9 When ready for use, the end-use concentration is not to exceed 100 ppm
Lauryl alcohol 112-53-8 When ready for use, the end-use concentration is not to exceed 100 ppm
d-Limonene 5989-27-5 When ready for use, the end-use concentration is not to exceed 100 ppm
Lipase, triacylglycerol 9001-62-1 When ready for use, the end-use concentration is not to exceed 500 ppm
Magnesium oxide 1309-48-4 None
Methane sulfonic acid 75-75-2 When ready for use, the end use concentration is not to exceed 5,000 ppm
Methylene blue 61-73-4 When ready for use, the end-use concentration is not to exceed 0.4 ppm
Methyl-α-ionone 127-42-4 When ready for use, the end-use concentration is not to exceed 100 ppm
3-Methyl-2-butenyl acetate 1191-16-8 When ready for use, the end-use concentration is not to exceed 100 ppm
2-Methylundecanal 110-41-8 When ready for use, the end-use concentration is not to exceed 100 ppm
2-Methyl-1,3-propanediol 2163-42-0 None
Myristaldehyde 124-25-4 When ready for use, the end-use concentration is not to exceed 100 ppm
Myristic acid 544-63-8 When ready for use, the end-use concentration is not to exceed 100 ppm
Neryl acetate 141-12-8 When ready for use, the end-use concentration is not to exceed 100 ppm
Nitric acid 7697-37-2 When ready for use, the end-use concentration is not to exceed 1,000 ppm
Nonanal 124-19-6 When ready for use, the end-use concentration is not to exceed 100 ppm
Nonanoic acid 112-05-0 When ready for use, the end-use concentration is not to exceed 100 ppm
Nonyl alcohol 143-08-8 When ready for use, the end-use concentration is not to exceed 100 ppm
α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles) None None
Octadecanoic acid, calcium salt 1592-23-0 None
9-Octadecenoic acid (9Z)-, sulfonated, oxidized 1315321-93-7 When ready for use, the end-use concentration is not to exceed 250 ppm.
9-Octadecenoic acid (9Z)-, sulfonated, oxidized, potassium salts 1315321-94-8 When ready for use, the end-use concentration is not to exceed 250 ppm.
9-Octadecenoic acid (9Z)-, sulfonated, oxidized, sodium salts 1315321-95-9 When ready for use, the end-use concentration is not to exceed 250 ppm.
Octanal 124-13-0 When ready for use, the end-use concentration is not to exceed 100 ppm
1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 46 ppm
Octanoic acid 124-07-2 When ready for use, the end-use concentration is not to exceed 52 ppm
Octanoic acid 124-07-2 When ready for use, the end-use concentration is not to exceed 100 ppm
1-Octanol 111-87-5 When ready for use, the end-use concentration is not to exceed 100 ppm
Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 9003-11-6 None
Palmitic acid 57-10-3 When ready for use, the end-use concentration is not to exceed 100 ppm
Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 58 ppm
Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 52 ppm
Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 14 ppm
Phosphoric acid, trisodium salt 7601-54-9 When ready for use, the end-use concentration is not to exceed 5916 ppm
Potassium bromide 7758-02-3 When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen
Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
1,3-Propanediol 504-63-2 None
Propionic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 100 ppm
Propylene glycol 57-55-6 None
Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides 8001-54-5 When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound
Quaternary ammonium compounds: n-alkyl (C12-18) dimethyl benzyl ammonium chloride 68424-85-1 When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound
Quaternary Ammonium Compounds: n-alkyl (C 12-14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 85409-23-0 When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound.
Quaternary ammonium compounds n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 None When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound
Quaternary ammonium compounds, Di-n-Alkyl (C8-10) dimethyl ammonium chloride, average molecular weight (in amu) 332 to 361 None When ready for use, the end-use concentration of these specific in quaternary ammonium compounds is not to exceed 240 ppm of active quaternary ammonium compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 400 ppm of active quaternary compound
Quaternary ammonium compounds, didecyl dimethyl ammonium carbonate/didecyl dimethyl ammonium bicarbonate 148788-55-0/148812-654-1 When ready for use, the end-use concentration of these specific ammonium compounds is not to exceed 400 ppm of active quaternary ammonium compound
Silver ions resulting from the use of electrolytically-generated silver ions stabilized in citric acid as silver dihydrogen citrate (does not include metallic silver) 14701-21-4 When ready for use, the end-use concentration of silver ions is not to exceed 50 ppm of active silver
Sodium bisulfate 7681-38-1 When ready for use, the end-use concentration is not to exceed 2,000 ppm.
Sorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)- 9005-65-6 None
Stearic acid. 57-11-4 When ready for use, the end-use concentration is not to exceed 100 ppm
Sulfuric acid 7664-93-9 Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils in antimicrobial formulations. Not to exceed 600 ppm.
Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 When ready for use, the end-use concentration is not to exceed 350 ppm
Tall oil fatty acid (CAS Reg. No. 61790-12-3) Solvent/carrier
Trans-1,3,3,3-tetrafluoroprop-1-ene 29118-24-9 None
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt 2893-78-9 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
2-Tridecanal 7774-82-5 When ready for use, the end-use concentration is not to exceed 100 ppm
3,5,5-Trimethylhexanal 5435-64-3 When ready for use, the end-use concentration is not to exceed 100 ppm
Undecanal 112-44-7 When ready for use, the end-use concentration is not to exceed 100 ppm
Undecyl alcohol 112-42-5 When ready for use, the end-use concentration is not to exceed 100 ppm
Valeraldehyde 110-62-3 When ready for use, the end-use concentration is not to exceed 100 ppm
Valeric acid 109-52-4 When ready for use, the end-use concentration is not to exceed 100 ppm
Waxes and waxy substances, rice bran, oxidized 1883583-80-9 None
Xylenesulfonic acid, sodium salt 1300-72-7 When ready for use, the end-use concentration is not to exceed 500 ppm

(b) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Dairy processing equipment, and food-processing equipment and utensils.

Open Table
Pesticide Chemical CAS Reg. No. Limits
Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 1200 ppm
Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide 68608-66-2 When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid
Butanedioic acid, octenyl- 28805-58-5 When ready for use, the end-use concentration is not to exceed 156 ppm
Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 None None
Calcium chloride 10043-52-4 When ready for use, the end-use concentration is not to exceed 17 ppm
n-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid None When ready for use, the end-use concentration is not to exceed 39 ppm
Decanoic acid 334-48-5 When ready for use, the end-use concentration is not to exceed 90 ppm
Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt 132-43-4 When ready for use, the end-use concentration is not to exceed 237 ppm
Ethylenediaminetetraacetic acid (EDTA), disodium salt 139-33-3 When ready for use, the end-use concentration is not to exceed 1400 ppm
FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705) 1934-21-0 None
C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster 5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9 When ready for use, the end-use concentration is not to exceed 1,000 ppm.
D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, None
D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned) None
D-Gluconic acid, monosodium salt 527-07-1 When ready for use, the end-use concentration is not to exceed 760 ppm
Hydriodic acid 10034-85-2 When ready for use, the total end-use concentration of all iodide-producing chemicals is not to exceed 25 ppm of titratable iodine
Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 465 ppm
Hypochlorous acid 7790-92-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Lactic acid 50-21-5 When ready for use, the end-use concentration is not to exceed 138 ppm
Nonanoic acid 112-05-0 When ready for use, the end-use concentration is not to exceed 90 ppm
1-Octanamine, N,N-dimethyl- 7378-99-6 When ready for use, the end-use concentration is not to exceed 113 ppm
1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm
1-Octanesulfonic acid 3944-72-7 When ready for use, the end-use concentration is not to exceed 172 ppm
1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 297 ppm
1-Octanesulfonic acid, 2-sulfino- 113652-56-5 When ready for use, the end-use concentration is not to exceed 102 ppm
Octanoic acid 124-07-2 When ready for use, the end-use concentration is not to exceed 176 ppm
Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)
Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 315 ppm
Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 122 ppm
Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 34 ppm
Phosphoric acid 7664-38-2 None
Phosphoric acid, monosodium salt 7558-80-7 When ready for use, the end-use concentration is not to exceed 350 ppm
Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Propanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 297 ppm
2,6-Pyridinedicarboxylic acid 499-83-2 When ready for use, the end-use concentration is not to exceed 1.2 ppm
Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 When ready for use, the end-use concentration is not to exceed 350 ppm

(c) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-processing equipment and utensils.

Open Table
Pesticide Chemical CAS Reg. No. Limits
Acetic acid 64-19-7 When ready for use, the end-use concentration is not to exceed 1,200 ppm
Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide 68608-66-2 When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid
Ammonium chloride 12125-02-9 When ready for use, the end-use concentration is not to exceed 48 ppm
[1,1′-Biphenyl]-2-ol 90-43-7 When ready for use, the end-use concentration is not to exceed 400 ppm
Boric acid, sodium salt 7775-19-1 None
Butanedioic acid, octenyl- 28805-58-5 When ready for use, the end-use concentration is not to exceed 156 ppm
Butanedioic acid, sulfo-, 1,4-dioctyl ester, sodium salt 1639-66-3 None
Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, cloudpoint of 90 - 100oC in 0.5 aqueous solution, average molecular weight (in amu), 3300 None None
Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 None None
Calcium chloride 10043-52-4 When ready for use, the end-use concentration is not to exceed 17 ppm
n-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid None When ready for use, the end-use concentration is not to exceed 39 ppm
3-Cyclohexene-1-methanol,α,α,4-trimethyl- 98-55-5 None
1-Decanaminium, N-decyl-N, N-dimethyl-, chloride 7173-51-5 When ready for use, the end-use concentration is not to exceed 200 ppm of active quaternary compound
Decanoic acid 3347-48-5 When ready for use, the end-use concentration is not to exceed 234 ppm
Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt 132-43-4 When ready for use, the end-use concentration is not to exceed 237 ppm
Ethanol 64-17-5 None
Ethanol, 2 butoxy- 111-76-2 None
Ethanol, 2-(2-ethoxyethoxy)- 111-90-0 None
Ethylenediaminetetraacetic acid (EDTA), disodium salt 139-33-3 When ready for use, the end-use concentration is not to exceed 1400 ppm
Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt 64-02-8 None
Fatty acids, coco, potassium salts 61789-30-8 None
Fatty acids, tall-oil, sulfonated, sodium salts 68309-27-3 When ready for use, the end-use concentration is not to exceed 66 ppm
FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705) 1934-21-0 None
D-Gluconic acid, monosodium salt 527-07-1 When ready for use, the end-use concentration is not to exceed 760 ppm
Hydriodic acid 10034-85-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Hydrogen peroxide 7722-84-1 When ready for use, the end-use concentration is not to exceed 1100 ppm
Hypochlorous acid 7790-92-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Hypochlorous acid, calcium salt 7778-54-3 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Hypochlorous acid, lithium salt 13840-33-0 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine and 30 ppm lithium
Hypochlorous acid, potassium salt 7778-66-7 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Hypochlorous acid, sodium salt 7681-52-9 When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Iodine 7553-56-2 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Magnesium oxide 1309-48-4 None
Methylene blue 61-73-4 When ready for use, the end-use concentration is not to exceed 0.4 ppm
Neodecanoic acid 26896-20-8 When ready for use, the end-use concentration is not to exceed 174 ppm
Nonanoic acid 112-05-0 When ready for use, the end-use concentration is not to exceed 90 ppm
α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) maximum average molecular weight (in amu), 748 None None
α-(p-Nonylphenol)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles None None
α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole p-nonylphenol with 9 to 12 moles ethylene oxide None None
α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene), 9 to 13 moles ethylene oxide None None
Octadecanoic acid, calcium salt 1592-23-0 None
9-Octadecenoic acid (9Z)-, sulfonated 68988-76-1 When ready for use, the end-use concentration is not to exceed 312 ppm
9-Octadecenoic acid (9Z)-sulfonated, sodium salts 68443-05-0 When ready for use, the end-use concentration is not to exceed 200 ppm
1-Octanamine, N,N-dimethyl- 7378-99-6 When ready for use, the end-use concentration is not to exceed 113 ppm
1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm
1-Octanesulfonic acid 3944-72-7 When ready for use, the end-use concentration is not to exceed 172 ppm
1-Octanesulfonic acid, sodium salt 5324-84-5 When ready for use, the end-use concentration is not to exceed 312 ppm
1-Octanesulfonic acid, 2-sulfino- 113652-56-5 When ready for use, the end-use concentration is not to exceed 102 ppm
Octanoic acid 124-07-2 When ready for use, the end-use concentration is not to exceed 234 ppm
Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900 9003-11-6 None
Oxirane, methyl-, polymer with oxirane, block, average molecular weight (in amu), 1900 106392-12-5 None
Oxirane, methyl-, polymer with oxirane, block, minimum average molecular weight (in amu), 2000 None None
Oxirane, methyl-, polymer with oxirane, block, 27 to 31 moles of polyoxypropylene, average molecular weight (in amu) 2000 None None
Oxychloro species (predominantly chlorite, chlorate and chlorine dioxide in an equilibrium mixture) generated either (i) by directly metering a concentrated chlorine dioxide solution prepared just prior to use, into potable water, or (ii) by acidification of an aqueous alkaline solution of oxychloro species (predominately chlorite and chlorate) followed by dilution with potable water None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)”
Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite None When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)”
2,4-Pentanediol, 2-methyl- 107-41-5 None
Peroxyacetic acid 79-21-0 When ready for use, the end-use concentration is not to exceed 315 ppm
Peroxyoctanoic acid 33734-57-5 When ready for use, the end-use concentration is not to exceed 122 ppm
Phenol, 4-chloro-2-(phenylmethyl)- 120-32-1 When ready for use, the end-use concentration is not to exceed 320 ppm
Phenol, 4-(1,1-dimethylpropyl)- 80-46-6 When ready for use, the end-use concentration is not to exceed 80 ppm
Phosphonic acid, (1-hydroxyethylidene)bis- 2809-21-4 When ready for use, the end-use concentration is not to exceed 34 ppm
Phosphoric acid 7664-38-2 None
Phosphoric acid, monosodium salt 7558-80-7 When ready for use, the end-use concentration is not to exceed 350 ppm
Phosphoric acid, trisodium salt 7601-54-9 When ready for use, the end-use concentration is not to exceed 5916 ppm
Poly(oxy-1,2-ethanediyl), α-[(1,1,3,3-tetramethylbutyl) phenyl]-ω-hydroxy-, produced with one mole of the phenol and 4 to 14 moles ethylene oxide None None
Potassium bromide 7758-02-3 When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen
Potassium iodide 7681-11-0 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Propanoic acid 79-09-4 When ready for use, the end-use concentration is not to exceed 297 ppm
2,6-Pyridinedicarboxylic acid 499-83-2 When ready for use, the end-use concentration is not to exceed 1.2 ppm
Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides 8001-54-5 When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound
Quaternary ammonium compounds, n-alkyl (C12-C14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound
Quaternary ammonium compounds, n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound
Quaternary ammonium compounds, di-n-Alkyl (C8-C10) dimethyl ammonium chloride, average molecular weight (in amu), 332 to 361 None When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 240 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound
Sodium-α-alkyl(C12-C15)-ω-hydroxypoly (oxyethylene) sulfate with the poly(oxyethylene) content averaging one mole None None
Sodium bromide 7647-15-6 When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen
Sodium iodide 7681-82-5 When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate) 151-21-3 None
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro- 2782-57-2 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, potassium salt 2244-21-5 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt 2893-78-9 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5-trichloro- 87-90-1 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
1,3,5-Triazine, N,N′,N″-trichloro-2,4,6-triamino- 7673-09-8 When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine

[69 FR 23136, Apr. 28, 2004]


Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.