Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT):
(a) Rolling spent neat oils—subpart F—BAT. There shall be no discharge of process wastewater pollutants.
(b) Rolling contact cooling water.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium rolled with contact cooling water | ||
Cyanide | 0.142 | 0.059 |
Lead | 0.205 | 0.098 |
Zinc | 0.713 | 0.298 |
Ammonia | 65.1 | 28.6 |
Fluoride | 29.1 | 12.90 |
(c) Drawing spent neat oils—subpart F—BAT. There shall be no discharge of process wastewater pollutants.
(d) Extrusion spent neat oils—subpart F—BAT. There shall be no discharge of process wastewater pollutants.
(e) Extrusion spent lubricants.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium extruded | ||
Cyanide | 0.021 | 0.009 |
Lead | 0.030 | 0.015 |
Zinc | 0.105 | 0.044 |
Ammonia | 9.59 | 4.22 |
Fluoride | 4.28 | 1.90 |
(f) Extrusion press hydraulic fluid leakage.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium extruded | ||
Cyanide | 0.052 | 0.022 |
Lead | 0.075 | 0.036 |
Zinc | 0.260 | 0.109 |
Ammonia | 23.7 | 10.5 |
Fluoride | 10.6 | 4.70 |
(g) Forging spent lubricants—subpart F—BAT. There shall be no discharge of process wastewater pollutants.
(h) Forging contact cooling water.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of forged titanium cooled with water | ||
Cyanide | 0.029 | 0.012 |
Lead | 0.042 | 0.020 |
Zinc | 0.146 | 0.061 |
Ammonia | 13.3 | 5.86 |
Fluoride | 5.95 | 2.64 |
(i) Forging equipment cleaning wastewater.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium forged cyanide | ||
Cyanide | 0.012 | 0.005 |
Lead | 0.017 | 0.008 |
Zinc | 0.059 | 0.025 |
Ammonia | 5.33 | 2.35 |
Fluoride | 2.38 | 1.06 |
(j) Forging press hydraulic fluid leakage.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium forged | ||
Cyanide | 0.293 | 0.121 |
Lead | 0.424 | 0.202 |
Zinc | 1.48 | 0.616 |
Ammonia | 135 | 59.2 |
Fluoride | 60.1 | 26.7 |
(k) Tube reducing spent lubricants—subpart F—BAT. There shall be no discharge of process wastewater pollutants.
(l) Heat treatment contact cooling water—subpart F—BAT. There shall be no discharge allowance for process wastewater pollutants.
(m) Surface treatment spent baths.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium surface treated | ||
Cyanide | 0.061 | 0.025 |
Lead | 0.088 | 0.042 |
Zinc | 0.304 | 0.127 |
Ammonia | 27.7 | 12.2 |
Fluoride | 12.4 | 5.49 |
(n) Surface treatment rinse.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium surface treated | ||
Cyanide | 0.847 | 0.351 |
Lead | 1.23 | 0.584 |
Zinc | 4.27 | 1.78 |
Ammonia | 389 | 171 |
Fluoride | 174 | 77.1 |
(o) Wet air pollutant control scrubber blowdown.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium surface treated or forged | ||
Cyanide | 0.062 | 0.026 |
Lead | 0.090 | 0.043 |
Zinc | 0.313 | 0.131 |
Ammonia | 28.5 | 12.6 |
Fluoride | 12.8 | 5.68 |
(p) Alkaline cleaning spent baths.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium alkaline cleaned | ||
Cyanide | 0.070 | 0.029 |
Lead | 0.101 | 0.048 |
Zinc | 0.351 | 0.147 |
Ammonia | 32 | 14.1 |
Fluoride | 14.3 | 6.34 |
(q) Akaline cleaning rinse.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium alkaline cleaned | ||
Cyanide | 0.080 | 0.033 |
Lead | 0.116 | 0.055 |
Zinc | 0.403 | 0.169 |
Ammonia | 36.8 | 16.2 |
Fluoride | 16.4 | 7.29 |
(r) Molten salt rinse.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium treated with molten salt | ||
Cyanide | 0.277 | 0.115 |
Lead | 0.401 | 0.191 |
Zinc | 1.40 | 0.583 |
Ammonia | 128 | 56 |
Fluoride | 56.8 | 25.2 |
(s) Tumbling wastewater.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium tumbled | ||
Cyanide | 0.022 | 0.010 |
Lead | 0.033 | 0.016 |
Zinc | 0.116 | 0.048 |
Ammonia | 11.0 | 4.60 |
Fluoride | 4.70 | 2.09 |
(t) Sawing or grinding spent neat oils—subpart F—BAT. There shall be no discharge of process wastewater pollutants.
(u) Sawing or grinding spent emulsions.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium sawed or ground with emulsions | ||
Cyanide | 0.053 | 0.022 |
Lead | 0.077 | 0.037 |
Zinc | 0.267 | 0.112 |
Ammonia | 24.4 | 10.7 |
Fluoride | 10.9 | 4.83 |
(v) Sawing or grinding contact cooling water.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) to titanium sawed or ground with contact cooling water | ||
Cyanide | 0.138 | 0.057 |
Lead | 0.200 | 0.095 |
Zinc | 0.695 | 0.291 |
Ammonia | 63.5 | 27.9 |
Fluoride | 28.3 | 12.6 |
(w) Dye penetrant testing wastewater.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium tested with dye penetrant methods | ||
Cyanide | 0.325 | 0.135 |
Lead | 0.471 | 0.224 |
Zinc | 1.64 | 0.683 |
Ammonia | 149 | 65.7 |
Fluoride | 66.7 | 29.6 |
(x) Miscellaneous wastewater sources.
Subpart F—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
mg/off-kg (pounds per million off-pounds) of titanium formed | ||
Cyanide | 0.010 | 0.004 |
Lead | 0.014 | 0.007 |
Zinc | 0.048 | 0.020 |
Ammonia | 4.32 | 1.90 |
Fluoride | 1.93 | 0.856 |
(y) Degreasing spent solvents—subpart F—BAT. There shall be no discharge of process wastewater pollutants.
[50 FR 34270, Aug. 23, 1985; 51 FR 2887, Jan. 22, 1986]