1. LawStack
  2. Title 40 - Protection of Environment
  3. Chapter I - ENVIRONMENTAL PROTECTION AGENCY
  4. Subchapter C - AIR PROGRAMS
  5. Part 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
  6. Subpart MMMMM - National Emission Standards for Hazardous Air Pollutants: Flexible Polyurethane Foam Fabrication Operations
  7. 40 CFR Table 1
40 CFR Table 1
Emission Limits
June 9, 2020
CFR

As stated in §63.8790(a), you must comply with the emission limits in the following table:

Open Table
For .  .  . You must .  .  .
1. Each existing, new, or reconstructed loop slitter adhesive use affected source Not use any HAP-based adhesives.
2. Each new or reconstructed flame lamination affected source Reduce HAP emissions by 90 percent.
3. Each existing flame lamination affected sources There are no emission limits for existing flame lamination sources. However, you must submit an initial notification per §63.8816(b).
Previous
Topic Notification, Reports, and Records
Next
Table 2 Operating Limits for New or Reconstructed Flame Lamination Affected Sources

Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.

Designed and built by Tekk Innovations LLC, the makers of the LawStack iPhone app or Android app.

© 2020 Tekk Innovations LLC