1. LawStack
  2. Title 40 - Protection of Environment
  3. Chapter I - ENVIRONMENTAL PROTECTION AGENCY
  4. Subchapter C - AIR PROGRAMS
  5. Part 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
  6. Subpart MMMMM - National Emission Standards for Hazardous Air Pollutants: Flexible Polyurethane Foam Fabrication Operations
  7. 40 CFR Table 2
40 CFR Table 2
Operating Limits for New or Reconstructed Flame Lamination Affected Sources
June 9, 2020
CFR

As stated in §63.8790(b), you must comply with the operating limits in the following table:

Open Table
For each .  .  . You must .  .  .
1. Scrubber a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performance test.
    b. Maintain the daily average scrubber effluent pH within the operating range value established during the performance test.
    c. If you use a venturi scrubber, maintain the daily average pressure drop across the venturi within the operating range value established during the performance test.
2. Other type of control device to which flame lamination emissions are ducted Maintain your operating parameter(s) within the ranges established during the performance test and according to your monitoring plan.
Previous
Table 1 Emission Limits
Next
Table 3 Performance Test Requirements for New or Reconstructed Flame Lamination Affected Sources

Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.

Designed and built by Tekk Innovations LLC, the makers of the LawStack iPhone app or Android app.

© 2020 Tekk Innovations LLC