40 CFR Table 2
Alternative Organic HAP Content Requirements for Open Molding Resin and Gel Coat Operations
June 9, 2020
As specified in §§63.5701(b), 63.5704(b)(2), and 63.5713(a), (b), and (d), you must comply with the requirements in the following table:
Open Table
For this operation— | And this application method— | You must not exceed this weighted-average organic HAP content (weight percent) requirement— |
---|---|---|
1. Production resin operations | Atomized (spray) | 28 percent. |
2. Production resin operations | Nonatomized (nonspray) | 35 percent. |
3. Pigmented gel coat operations | Any method | 33 percent. |
4. Clear gel coat operations | Any method | 48 percent |
5. Tooling resin operations | Atomized (spray) | 30 percent. |
6. Tooling resin operations | Nonatomized (nonspray) | 39 percent. |
7. Tooling gel coat operations | Any method | 40 percent. |