As required in §63.7833(a), you must demonstrate continuous compliance with the emission and opacity limits according to the following table:

Open Table
For .  .  . You must demonstrate continuous compliance by .  .  .
1. Each windbox exhaust stream at an existing sinter plant a. Maintaining emissions of particulate matter at or below 0.4 lb/ton of product sinter; and
    b. Conducting subsequent performance tests at the frequencies specified in §63.7821.
2. Each windbox exhaust stream at a new sinter plant a. Maintaining emissions of particulate matter at or below 0.3 lb/ton of product sinter; and
    b. Conducting subsequent performance tests at the frequencies specified in §63.7821.
3. Each discharge end at an existing sinter plant a. Maintaining emissions of particulate matter from one or more control devices at or below 0.02 gr/dscf; and
    b. Maintaining the opacity of secondary emissions that exit any opening in the building or structure housing the discharge end at or below 20 percent (6-minute average); and
    c. Conducting subsequent performance tests at the frequencies specified in §63.7821.
4. Each discharge end at a new sinter plant a. Maintaining emissions of particulate matter from one or more control devices at or below 0.01 gr/dscf; and
    b. Maintaining the opacity of secondary emissions that exit any opening in the building or structure housing the discharge end at or below 10 percent (6-minute average); and
    c. Conducting subsequent performance tests at the frequencies specified in §63.7821.
5. Each sinter cooler at an existing sinter plant a. Maintaining the opacity of emissions that exit any sinter cooler at or below 10 percent (6-minute average); and
    b. Conducting subsequent performance tests at the frequencies specified in §63.7821.
6. Each sinter cooler at a new sinter plant a. Maintaining emissions of particulate matter at or below 0.1 gr/dscf; and
    b. Conducting subsequent performance tests at the frequencies specified in §63.7821.
7. Each casthouse at an existing blast furnace a. Maintaining emissions of particulate matter from a control device at or below 0.01 gr/dscf; and
    b. Maintaining the opacity of secondary emissions that exit any opening in the casthouse or structure housing the casthouse at or below 20 percent (6-minute average); and
    c. Conducting subsequent performance tests at the frequencies specified in §63.7821.
8. Each casthouse at a new blast furnace a. Maintaining emissions of particulate matter from a control device at or below 0.003 gr/dscf; and
    b. Maintaining the opacity of secondary emissions that exit any opening in the casthouse or structure housing the casthouse at or below 15 percent (6-minute average); and
    c. Conducting subsequent performance tests at the frequencies specified in §63.7821.
9. Each BOPF at a new or existing BOPF shop a. Maintaining emissions of particulate matter from the primary control system for a BOPF with a closed hood system at or below 0.03 gr/dscf; and
    b. Maintaining emissions of particulate matter from the primary control system for a BOPF with an open hood system at or below 0.02 gr/dscf for an existing BOPF shop or 0.01 gr/dscf for a new BOPF shop; and
    c. Maintaining emissions of particulate matter from a control device applied solely to secondary emissions from a BOPF at or below 0.01 gr/dscf for an existing BOPF shop or 0.0052 gr/dscf for a new BOPF shop; and
    d. Conducting subsequent performance tests at the frequencies specified in §63.7821.
10. Each hot metal transfer, skimming, and desulfurization operation at a new or existing BOPF shop a. Maintaining emissions of particulate matter from a control device at or below 0.01 gr/dscf at an existing BOPF or 0.003 gr/dscf for a new BOPF; and
    b. Conducting subsequent performance tests at the frequencies specified in §63.7821.
11. Each ladle metallurgy operation at a new or existing BOPF shop a. Maintaining emissions of particulate matter from a control device at or below 0.01 gr/dscf at an existing BOPF shop or 0.004 gr/dscf for a new BOPF shop; and
    b. Conducting subsequent performance tests at the frequencies specified in §63.7821.
12. Each roof monitor at an existing BOPF shop a. Maintaining the opacity of secondary emissions that exit any opening in the BOPF shop or other building housing the BOPF shop or shop operation at or below 20 percent (3-minute average); and
    b. Conducting subsequent performance tests at the frequencies specified in §63.7821.
13. Each roof monitor at a new BOPF shop a. Maintaining the opacity (for any set of 6-minute averages) of secondary emissions that exit any opening in the BOPF shop or other building housing a bottom-blown BOPF or shop operation at or below 10 percent, except that one 6-minute period greater than 10 percent but no more than 20 percent may occur once per steel production cycle; and
    b. Maintaining the opacity (for any set of 3-minute averages) of secondary emissions that exit any opening in the BOPF shop or other building housing a top-blown BOPF or shop operation at or below 10 percent, except that one 3-minute period greater than 10 percent but less than 20 percent may occur once per steel production cycle; and
    c. Conducting subsequent performance tests at the frequencies specified in §63.7821.

[71 FR 39590, July 13, 2006]


Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.