1. LawStack
  2. Title 40 - Protection of Environment
  3. Chapter I - ENVIRONMENTAL PROTECTION AGENCY
  4. Subchapter C - AIR PROGRAMS
  5. Part 60 - STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES
  6. Subpart EEEE - Standards of Performance for Other Solid Waste Incineration Units for Which Construction is Commenced After December 9, 2004, or for Which Modification or Reconstruction is Commenced on or After June 16, 2006
  7. 40 CFR Table 3
40 CFR Table 3
Requirements for Continuous Emission Monitoring Systems (CEMS)
June 9, 2020
CFR

As stated in §60.2940, you must comply with the following:

Open Table
For the following
pollutants		 Use the following span values for your CEMS Use the following performance specifications (P.S.) in appendix B of this part for your CEMS If needed to meet minimum data requirements, use the following alternate methods in appendix A of this part to collect data
1. Carbon Monoxide 125 percent of the maximum hourly potential carbon monoxide emissions of the waste combustion unit P.S.4A Method 10.
2. Oxygen 25 percent oxygen P.S.3 Method 3A or 3B, or ANSI/ASME PTC 19.10-1981 (IBR, see §60.17(h)) in lieu of Method 3B only.
Previous
Table 2 Operating Limits for Incinerators and Wet Scrubbers
Next
Table 4 Summary of Reporting Requirements

Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.

Designed and built by Tekk Innovations LLC, the makers of the LawStack iPhone app or Android app.

© 2020 Tekk Innovations LLC