As stated in §63.8395, you must meet each compliance date in the following table that applies to you:

Open Table
If you have a(n) .  .  . Then you must .  .  . No later than .  .  .
1. New or reconstructed affected source and the initial startup of your affected source is after December 18, 2014, but before December 28, 2015 Comply with the applicable emission limitations and work practice standards in Tables 1, 2, and 3 to this subpart December 28, 2015.
2. New or reconstructed affected source and the initial startup of your affected source is after December 28, 2015 Comply with the applicable emission limitations and work practice standards in Tables 1, 2, and 3 to this subpart Initial startup of your affected source.
3. Existing affected source Comply with the applicable emission limitations and work practice standards in Tables 1, 2, and 3 to this subpart December 26, 2018.
4. Existing area source that increases its emissions or its potential to emit such that it becomes a major source of HAP by adding a new affected source or by reconstructing Be in compliance with this subpart Initial startup of your affected source as a major source.
5. New area source (i.e., an area source for which construction or reconstruction commenced after December 18, 2014) that increases its emissions or its potential to emit such that it becomes a major source of HAP Be in compliance with this subpart Initial startup of your affected source as a major source.

Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.