(a) Each manufacturer and importer of any architectural coating subject to the provisions of this subpart may designate a limited quantity of coatings to be exempt from the VOC content limits in table 1 of this subpart and the exceedance fee provisions of §59.403 of this subpart, provided all of the requirements in paragraphs (a)(1) through (a)(4) of this section are met.
(1) The total amount of VOC contained in all the coatings selected for exemption must be equal to or less than 23 megagrams (25 tons) for the period of time from September 13, 1999 through December 31, 2000; 18 megagrams (20 tons) in the year 2001; and 9 megagams (10 tons) per year in the year 2002 and each subsequent year. The amount of VOC contained in each coating shall be calculated using the procedure in paragraph (b) of this section. Compliance with the tonnage exemption will be determined based on the amount of VOC, as expressed in metric units.
(2) The container labeling requirements of §59.405 of this subpart.
(3) The recordkeeping requirements of §59.407(c) of this subpart.
(4) The reporting requirements of §59.408(b) and (e) of this subpart.
(b) Each manufacturer and importer choosing to use the exemption described in paragraph (a) of this section must use equations 3 and 4 to calculate the total amount of VOC for each time period the exemption is elected. The VOC amount shall be determined without colorant that is added after the tint base is manufactured or imported.
Where:
Total VOC = Total megagrams of VOC contained in all coatings being claimed under the exemption.
VOCc = Megagrams of VOC, for each coating (c) claimed under the exemption, as computed by equation 4.
n = Number of coatings for which exemption is claimed.
Where:
Volume Manufactured or Imported = Volume of the coating manufactured or imported, in liters, including the volume of any water and exempt compounds and excluding the volume of any colorant added to tint bases, for the time period the exemption is claimed.
VOC Amount = Grams of VOC per liter of coating thinned to the manufacturer's maximum recommendation, including the volume of any water and exempt compounds.
[63 FR 48877, Sept. 11, 1998; 64 FR 35001, June 30, 1999]