Paragraphs (a) through (f) of this section apply to data used for fuel economy labeling under subpart D of this part. Paragraphs (d) through (f) of this section are used to calculate 5-cycle carbon-related exhaust emission values for the purpose of determining optional credits for CO2-reducing technologies under §86.1866 of this chapter and to calculate 5-cycle CO2 values for the purpose of fuel economy labeling under subpart D of this part.

(a) City fuel economy. For each vehicle tested under §600.010-08(a), (b), or (c), as applicable, determine the 5-cycle city fuel economy using the following equation:

eCFR graphic er06jy11.016.gif

(2) Terms used in the equations in this paragraph (a) are defined as follows:

Bag Y FEX = the fuel economy in miles per gallon of fuel during bag Y of the FTP test conducted at an ambient temperature X of 75 °F or 20 °F.

SC03 FE = fuel economy in mile per gallon over the SC03 test.

US06 City FE = fuel economy in miles per gallon over the “city” portion of the US06 test.

(b) Highway fuel economy.

(1) For each vehicle tested under §600.010-08(a), (b), or (c), as applicable, determine the 5-cycle highway fuel economy using the following equation:

eCFR graphic er06jy11.017.gif

(2) If the condition specified in §600.115-08(b)(2)(iii)(B) is met, in lieu of using the calculation in paragraph (b)(1) of this section, the manufacturer may optionally determine the highway fuel economy using the following modified 5-cycle equation which utilizes data from FTP, HFET, and US06 tests, and applies mathematic adjustments for Cold FTP and SC03 conditions:

(i) Perform a US06 test in addition to the FTP and HFET tests.

(ii) Determine the 5-cycle highway fuel economy according to the following formula:

eCFR graphic er06jy11.018.gif

(3) Terms used in the equations in this paragraph (b) are defined as follows:

Bag Y FEX = the fuel economy in miles per gallon of fuel during bag Y of the FTP test conducted at an ambient temperature X of 75 °F or 20 °F.

HFET FE = fuel economy in miles per gallon over the HFET test.

SC03 FE = fuel economy in mile per gallon over the SC03 test.

US06 Highway FE = fuel economy in miles per gallon over the highway portion of the US06 test.

US06 FE = fuel economy in miles per gallon over US06 test.

(c) Fuel economy calculations for hybrid electric vehicles. Test hybrid electric vehicles as described in SAE J1711 (incorporated by reference in §600.011). For FTP testing, this generally involves emission sampling over four phases (bags) of the UDDS (cold-start, transient, warm-start, transient); however, these four phases may be combined into two phases (phases 1 + 2 and phases 3 + 4). Calculations for these sampling methods follow:

(1) Four-bag FTP equations. If the 4-bag sampling method is used, manufacturers may use the equations in paragraphs (a) and (b) of this section to determine city and highway fuel economy estimates. If this method is chosen, it must be used to determine both city and highway fuel economy. Optionally, the following calculations may be used, provided that they are used to determine both city and highway fuel economy:

(i) City fuel economy.

eCFR graphic er06jy11.019.gif

(ii) Highway fuel economy.

eCFR graphic er06jy11.020.gif

(2) Two-bag FTP equations. If the 2-bag sampling method is used for the 75 °F FTP test, it must be used to determine both city and highway fuel economy. The following calculations must be used to determine both city and highway fuel economy:

(i) City fuel economy.

eCFR graphic er06jy11.021.gif

(ii) Highway fuel economy.

eCFR graphic er06jy11.022.gif

(3) For hybrid electric vehicles using the modified 5-cycle highway calculation in paragraph (b)(2) of this section, the equation in paragraph (b)(2)(ii)(A) of this section applies except that the equation for Start Fuel75 will be replaced with one of the following:

(i) The equation for Start Fuel75 for hybrids tested according to the 4-bag FTP is:

eCFR graphic er06jy11.023.gif

(ii) The equation for Start Fuel75 for hybrids tested according to the 2-bag FTP is:

eCFR graphic er06jy11.024.gif

(4) Terms used in the equations in this paragraph (b) are defined as follows:

Bag X/Y FE75 = fuel economy in miles per gallon of fuel during combined phases X and Y of the FTP test conducted at an ambient temperature of 75 °F.

Bag Y FEX = the fuel economy in miles per gallon of fuel during bag Y of the FTP test conducted at an ambient temperature X of 75 °F or 20 °F.

HFET FE = fuel economy in miles per gallon over the HFET test.

SC03 FE = fuel economy in mile per gallon over the SC03 test.

US06 City FE = fuel economy in miles per gallon over the city portion of the US06 test.

US06 Highway FE = fuel economy in miles per gallon over the highway portion of the US06 test.

(d) City CO2 emissions and carbon-related exhaust emissions. For each vehicle tested, determine the 5-cycle city CO2 emissions and carbon-related exhaust emissions using the following equation:

eCFR graphic er06jy11.025.gif

(2) To determine the City CO2 emissions, use the appropriate CO2 grams/mile values instead of CREE values in the equations in this paragraph (d).

(3) Terms used in the equations in this paragraph (d) are defined as follows:

Bag Y CREEX = the carbon-related exhaust emissions in grams per mile during bag Y of the FTP test conducted at an ambient temperature X of 75 °F or 20 °F.

US06 City CREE = carbon-related exhaust emissions in grams per mile over the city portion of the US06 test.

SC03 CREE = carbon-related exhaust emissions in grams per mile over the SC03 test.

(e) Highway CO2 emissions and carbon-related exhaust emissions.

(1) For each vehicle tested, determine the 5-cycle highway carbon-related exhaust emissions using the following equation:

eCFR graphic er06jy11.026.gif

(2) If the condition specified in §600.115-08(b)(2)(iii)(B) is met, in lieu of using the calculation in paragraph (e)(1) of this section, the manufacturer may optionally determine the highway carbon-related exhaust emissions using the following modified 5-cycle equation which utilizes data from FTP, HFET, and US06 tests, and applies mathematic adjustments for Cold FTP and SC03 conditions:

(i) Perform a US06 test in addition to the FTP and HFET tests.

(ii) Determine the 5-cycle highway carbon-related exhaust emissions according to the following formula:

eCFR graphic er15se11.064.gif

Where:

eCFR graphic er15se11.065.gif

Start CREE75 = 3.6 × (Bag 1CREE75 − Bag 3CREE75)

Running CREE = 1.007 × [(0.79 × US06 Highway CREE) + (0.21 × HFET CREE)] + [0.377 × 0.133 × ((0.00540 × A) + (0.1357 × US06 CREE))]

(3) To determine the Highway CO2 emissions, use the appropriate CO2 grams/mile values instead of CREE values in the equations in this paragraph (e).

(4) Terms used in the equations in this paragraph (e) are defined as follows:

A = 8,887 for gasoline-fueled vehicles, 10,180 for diesel-fueled vehicles, or an appropriate value specified by the Administrator for other fuels.

Bag Y CREEX = the carbon-related exhaust emissions in grams per mile during bag Y of the FTP test conducted at an ambient temperature X of 75 °F or 20 °F.

US06 Highway CREE = carbon-related exhaust emissions in grams per mile over the highway portion of the US06 test.

US06 CREE = carbon-related exhaust emissions in grams per mile over the US06 test.

HFET CREE = carbon-related exhaust emissions in grams per mile over the HFET test.

SC03 CREE = carbon-related exhaust emissions in grams per mile over the SC03 test.

(f) CO2 and carbon-related exhaust emissions calculations for hybrid electric vehicles. Test hybrid electric vehicles as described in SAE J1711 (incorporated by reference in §600.011). For FTP testing, this generally involves emission sampling over four phases (bags) of the UDDS (cold-start, transient, warm-start, transient); however, these four phases may be combined into two phases (phases 1 + 2 and phases 3 + 4). Calculations for these sampling methods follow:

(1) Four-bag FTP equations. If the 4-bag sampling method is used, manufacturers may use the equations in paragraphs (a) and (b) of this section to determine city and highway CO2 and carbon-related exhaust emissions values. If this method is chosen, it must be used to determine both city and highway CO2 emissions and carbon-related exhaust emissions. Optionally, the following calculations may be used, provided that they are used to determine both city and highway CO2 and carbon-related exhaust emissions values:

(i) City CO2 emissions and carbon-related exhaust emissions.

eCFR graphic er06jy11.028.gif

(ii) Highway CO2 emissions and carbon-related exhaust emissions.

eCFR graphic er06jy11.030.gif

(2) Two-bag FTP equations. If the 2-bag sampling method is used for the 75 °F FTP test, it must be used to determine both city and highway CO2 emissions and carbon-related exhaust emissions. The following calculations must be used to determine both city and highway CO2 emissions and carbon-related exhaust emissions:

(i) City CO2 emissions and carbon-related exhaust emissions.

eCFR graphic er06jy11.031.gif

(ii) Highway CO2 emissions and carbon-related exhaust emissions.

eCFR graphic er06jy11.032.gif

(3) For hybrid electric vehicles using the modified 5-cycle highway calculation in paragraph (e)(2) of this section, the equation in paragraph (e)(2)(ii)(A) of this section applies except that the equation for Start CREE75 will be replaced with one of the following:

(i) The equation for Start CREE75 for hybrids tested according to the 4-bag FTP is:

Start CREE75= 3.6 × (Bag 1 CREE75 − Bag 3 CREE75 + 3.9 × (Bag 2 CREE75 − Bag 4 CREE75)

(ii) The equation for Start CREE75 for hybrids tested according to the 2-bag FTP is:

Start CREE75= 7.5 × (Bag 12 CREE75 − Bag 34 CREE75)

(4) To determine the City and Highway CO2 emissions, use the appropriate CO2 grams/mile values instead of CREE values in the equations in paragraphs (f)(1) through (3) of this section.

(5) Terms used in the equations in this paragraph (e) are defined as follows:

Bag Y CREEX = the carbon-related exhaust emissions in grams per mile during bag Y of the FTP test conducted at an ambient temperature X of 75 °F or 20 °F.US06 City CREE = carbon-related exhaust emissions in grams per mile over the City portion of the US06 test.

SC03 CREE = carbon-related exhaust emissions in grams per mile over the SC03 test.

US06 Highway CREE = carbon-related exhaust emissions in grams per mile over the Highway portion of the US06 test.

HFET CREE = carbon-related exhaust emissions in grams per mile over the HFET test.

Bag X/Y CREE75 = carbon-related exhaust emissions in grams per mile of fuel during combined phases X and Y of the FTP test conducted at an ambient temperature of 75 °F.

[76 FR 39538, July 6, 2011, as amended at 76 FR 57379, Sept. 15, 2011]


Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.