(3) hybrid well, a riser or the production casing pressure is greater than 100 psig measured at the surface. (b) You are exempt from performing a diagnostic pressure test for the production casing on a well operating under active gas lift. [76 FR 64462, Oct. 18, 2011. Redesignated at 77 FR 50894

will protect information considered proprietary under applicable law. (e) Send comments regarding any aspect of the collection of information under this part, including suggestions for reducing the burden, to the Information Collection Clearance Officer, Bureau of Safety and Environmental Enforcement, 45600 Woodland Road, Sterling, VA 20166. [76 FR 64462, Oct. 18, 2011, as amended at 81 FR 36154, June 6, 2016]

(a) Modified EP. If the Regional Supervisor requires you to modify your proposed EP under §550.233(b)(2), you must submit the modification(s) to the Regional Supervisor in the same manner as for a new EP. You need submit only information related to the proposed modification(s). (b)

(a) Before BOEM will issue your commercial lease or approve an assignment of an existing commercial lease, you (or, for an assignment, the proposed assignee) must guarantee compliance with all terms and conditions of the lease by providing either: (1) A $100,000 minimum, lease-specific bond; or (2) Another approved financial assurance instrument guaranteeing performance up to $100,000, as specified

potential coal resources of the State, demand for those resources, the environment, the economy and the supply of coal, sufficient to enable the regulatory authority to prepare the statements required by §764.17(e); and (2) That becomes available from petitions, publications, experiments, permit application, mining and reclamation operations, and other sources.

temporary cessation of mining and reclamation operations for a period of thirty days or more, or as soon as it is known that a temporary cessation will extend beyond 30 days, each person who conducts underground mining activities shall submit to the regulatory authority a notice of intention to cease or abandon operations. This notice shall include a statement of the exact number of surface acres and the horizontal and vertical extent of sub-surface strata which have been in the permit area prior to

(a) “Historic coal funds” are moneys provided under section 402(g)(5) of SMCRA based on the amount of coal produced before August 3, 1977, in your State or on Indian lands in which you have an interest. Under the Surface Mining Control and Reclamation Act Amendments of 2006, which were enacted as Division C, Title II, Subtitle A of P.L. 109-432, each year we allocate and distribute 30 percent of annual AML fee collections for coal produced in the previous fiscal year

(a) This subpart is applicable to all gas production from Federal oil and gas leases. The purpose of this subpart is to establish the value of production for royalty purposes consistent with the mineral leasing laws, other applicable laws and lease terms. (b) If the regulations in this subpart are inconsistent with: (1) A Federal statute; (2) A settlement agreement

extent provided in Rule 408 of the Federal Rules of Evidence. (g) The presiding officer shall permit the parties to introduce rebuttal witnesses and evidence. (h) All documents and other evidence offered or taken for the record shall be open to examination by all parties, unless otherwise ordered by the presiding officer pursuant to §27.24

itself is not integral to and necessary for the production of a product or the providing of a service.

claims; (3) Submit all State cost share payments to EPA (See §35.6805(i)(5)); (4) Assume responsibility for all future operation and maintenance as required by CERCLA section 104(c) and addressed in 40 CFR 300.510 (c)(1) of the NCP, and if applicable, accept transfer of any Federal interest in

(b) You may voluntarily terminate your fellowship by sending the award official written notification setting forth the reasons for termination and the effective date. In that case, the EPA project officer may discuss the terms of the termination with you, and EPA may send you a letter or other document which states any termination conditions. (c) Costs resulting from obligations you incur after termination of an award are not allowable unless EPA expressly

any State or Indian country. (d) The proposal, promulgation, or revision of national primary and secondary ambient air quality standards shall not prohibit any State or Indian country from establishing ambient air quality standards for that State or area under a tribal CAA program or any portion thereof which are more stringent than the national standards. [36 FR 22384, Nov. 25, 1971, as amended at 63 FR 7274, Feb. 12

(4) A list of the categories from table 1 of this subpart for which the regulated entity recommends the use of automobile refinish coatings or coating components. (b) Each regulated entity must submit an explanation of any new date codes used by the regulated entity no later than 30 days after products bearing the new date code are first introduced into commerce.

(a) This subpart contains emission guidelines and compliance schedules for the control of certain designated pollutants from certain municipal waste combustors in accordance with section 111(d) and section 129 of the Clean Air Act and subpart B of this part. The provisions in these emission guidelines apply instead of the provisions of §60.24(f) of subpart B of this part

(b) The owner or operator shall determine compliance with the particulate matter standards in §60.132 as follows: (1) Method 5 shall be used to determine the particulate matter concentration during representative periods of charging and refining, but not during pouring of part of the production cycle. The sampling time and sample volume for each run

Each owner or operator of any affected facility shall comply with paragraph (a), (b), or (c) of this section for each vent stream on and after the date on which the initial performance test required by §§60.8 and 60.614 is completed, but not later than 60 days after achieving the maximum production rate at which the affected facility will be operated, or 180 days after

Each owner or operator of any affected facility shall comply with paragraph (a), (b), or (c) of this section for each vent stream on and after the date on which the initial performance test required by §§60.8 and 60.664 is completed, but not later than 60 days after achieving the maximum production rate at which the affected facility will be operated, or 180 days after

Each owner or operator of any affected facility shall comply with paragraph (a), (b), or (c) of this section for each vent stream on and after the date on which the initial performance test required by §§60.8 and 60.704 is completed, but not later than 60 days after achieving the maximum production rate at which the affected facility will be operated, or 180 days after

be automatically withdrawn when your state plan is approved. (b) If you do not submit an approvable state plan (or a negative declaration letter) to EPA that meets the requirements of this subpart and contains the emission limits in tables 6 through 9 of this subpart for CISWIs that commenced construction on or before June 4, 2010 and incinerator or ACIs that commenced reconstruction or modification on or after June 1, 2001 but no later than August 7, 2013, then

(a) You must be in compliance with the standards of this subpart no later than October 15, 2012 or upon startup, whichever is later. (b) At all times, including periods of startup, shutdown, and malfunction, owners and operators shall maintain and operate any affected facility including associated air pollution control equipment in a manner consistent with good air pollution control practice for minimizing emissions. Determination of

owner or operator is required to submit information entitled to protection from disclosure under section 114(c) of the Act, the owner or operator may submit such information separately. The requirements of section 114(c) shall apply to such information. (2) The contents of a title V permit shall not be entitled to protection under section 114(c) of the Act; however, information submitted as part of an application for a title V permit may be entitled to protection

0.15 Crude oil 0.0060 0.030 0.60 aUnits for average clingage factors are barrels per 1,000 square feet. bIf no specific

Monitoring Frequency for Equipment Other than Connectors Open Table Operating time (% of year) Equivalent

§§63.1650 through 63.1661 by November 21, 2001 and until June 30, 2017. As of June 30, 2017, the provisions of §§63.1650 through 63.1661 cease to apply to affected sources in existence prior to June 30, 2015. The provisions of §§63.1650 through 63.1661 remain enforceable at a source for

(a) Except as provided for in paragraphs (b) and (c) of this section, you are subject to this subpart if you own or operate an OLD operation that is located at, or is part of, a major source of HAP emissions. An OLD operation may occupy an entire plant site or be collocated with other industrial (e.g., manufacturing) operations at the same plant site. (b) Organic liquid distribution operations

(a) Perform an organic HAP emissions test to determine a site-specific organic HAP emissions factor using the test procedures in §63.5850. (b) Submit a petition to the Administrator for administrative review of this subpart. This petition must contain a description of the resin or gel coat application technology and supporting organic HAP emissions

pursuant to this section shall be deemed to be issued pursuant to the provisions of part 66. (b) The issuance of a notice of noncompliance shall operate to withdraw EPA delegation of authority to the State with respect to the particular facility in question. (c) If the Administrator determines that the State or local agent has issued a notice of noncompliance but has failed to pursue diligently subsequent steps for the assessment and

(3) These reports are prepared. (c) For purposes of this subpart, equivalence means that: CAB's in the EC are capable of conducting product and quality systems evaluations against U.S. regulatory requirements in a manner equivalent to those conducted by FDA; and CAB's in the United States are capable of conducting product and quality systems evaluations against EC regulatory requirements in a manner equivalent to those conducted by EC

maintain, ongoing surveillance over their CAB's by means of regular audit or assessment; (b) The parties undertake to compare methods used to verify that the CAB's listed in subpart B of this part comply with the relevant requirements of subpart B of this part. Existing systems for the evaluation of CAB's may be used as part of such comparison procedures; (c) Designating authorities shall consult as necessary with their counterparts, to