rounded edges that will minimize stress concentrations. (d) Paragraph (a) of this section does not apply to items manufactured before November 12, 1970, that meet all of the following: (1) The item is identifiable as to type, manufacturer, and model. (2) Specifications or standards giving pressure, temperature, and other appropriate criteria for the use of items are readily available.

Stress corrosion cracking §192.929 1For lines not subject to subpart O of this part, the terms “covered segment” and “covered pipeline segment” in

C. (66 to 78 degrees F.) and at a relative humidity between 10 percent and 70 percent for a period of at least four (4) hours prior to its application in a test. (2) Clean the impact surface of the head skin and impact plate surface, described in paragraph (a)(4) of this section, with 1,1,1 trichloroethane or equivalent prior to the test. (3) Suspend the head, as shown in Figure 51, so that the midsagittal plane makes an angle

investigation activities, identified causal and contributing factors, and a corrective action plan. (e) A final investigation report must be formally adopted by the oversight agency for each accident investigation. (1) If the oversight agency has conducted the investigation, it must formally transmit its final investigation report to the rail transit agency. (2) If the oversight agency has authorized an

-sensitive prismatic ink tint. (b) Security Lamination—retro-reflective security laminate is placed over vital information after it has been entered to allow for detection of attempts to alter this information. (c) Security Paper—paper which has been chemically treated to detect chemical alterations.

printed forms, but the instructions shall be followed. (c) The port director, in his discretion, may accept a computer printout instead of Customs Form 1302 for use at a specific port. However, to ensure that computer printouts may be used at all ports, the private party or foreign government first must obtain specific approval from Headquarters, U.S. Customs Service. (d) Forms which do not comply with the requirements of this section are

countries have agreed with the U.S. Department of Agriculture as to the grades or standards for fresh, chilled, or frozen beef within their respective countries which will satisfy the certification requirements of paragraph (a) of this section: Canada. [T.D. 82-8, 47 FR 945, Jan. 8, 1982, as amended by T.D. 89-1, 53 FR 51252, Dec. 21, 1988; T.D. 97-82, 62 FR 51769, Oct. 3, 1997; CBP Dec. 15-14, 80 FR 61284, Oct. 13, 2015]

opinion of the Administrator that the merchandise is in violation of the Act, the Administrator will notify the port director of this opinion and the port director will either (1) refuse delivery to the consignee, or (2) if the shipment has been released to the consignee under bond, demand redelivery of the shipment under the terms of the bond. If the merchandise is not redelivered within 30 days after the date of demand by the port director, the port director will issue a demand for liquidated

means the Secretary of the Commission. (i) Except for adjudicative investigations under subchapter C of this chapter, party means any person who has filed a complaint or petition on the basis of which an investigation has been instituted, or any person whose entry of appearance has been accepted pursuant to §201.11 (a) or (c). Mere

during an investigation under this section with respect to an article that was the subject of an affirmative Commission determination under section 202 of the Trade Act (except privileged information, classified information, and specific information of a type which there is a clear and compelling need to withhold from disclosure). Such disclosure shall be made in the manner provided for and in accordance with the procedures set forth in

investigation upon the embassy in Washington, DC of the country in which each proposed respondent is located as indicated in the Complaint. (2) If the Commission institutes temporary relief proceedings, upon institution of an investigation, the Commission shall serve: (i) Copies of the nonconfidential version of the motion for temporary relief, the nonconfidential version of the complaint, and the notice of investigation upon each

(a) Name. The name of the viticultural area described in this section is “Western Connecticut Highlands.” (b) Approved map. The approved map for determining the boundaries of the “Western Connecticut Highlands” viticultural area is 1 U.S.G.S. 1:125,000 series map. It is titled State of Connecticut, Compiled in 1965, Edition of 1966.

(a) Name. The name of the viticultural area described in this petition is “Malibu-Newton Canyon.” (b) Approved maps. The appropriate map for determining the boundary of the Malibu-Newton Canyon viticultural area is the U.S.G.S. map, “Point Dume Quadrangle, California” (7.5 Minute Series 1:24,000 Topographic map, photorevised 1981).

(a) Name. The name of the viticultural area described in this section is “Diamond Mountain District.” (b) Approved map. The appropriate maps for determining the boundary of the Diamond Mountain District viticultural area are two 1:24,000 Scale U.S.G.S. topography maps. They are titled: (1) Mark West Springs, CA 1993

§17.168(c) must be kept. Spirits recovered from intermediate products may be destroyed without notice to TTB. Spirits recovered from nonbeverage products may be destroyed pursuant to a notice filed with the appropriate TTB officer at least 12 days prior to the date of destruction. The notice shall state the reason for the destruction, the intended date of destruction, and the approximate quantity

(a) Upon receipt of the complete certified record of the hearing the appropriate TTB officer shall enter an order suspending, revoking, or annulling the permit (on TTB F 5000.5) or dismissing the proceedings in accordance with the administrative law judge's findings and decision, unless he disagrees with such findings and decision and files a petition with the Administrator, for review thereof, as provided in

furtherance of exploration, production, refining, transportation, or conservation of energy supplies, or the construction and maintenance of energy facilities, cannot reasonably be accomplished without exercising this authority. (b) The authority contained in subsection 101(c) shall not be used to require priority performance under contracts or orders relating to, or the allocation of, any supplies of materials and equipment except for programs or projects to maximize

(a) Promptly after expiration of the period for receiving written briefs, the presiding officer shall make a recommended decision based on the record and transmit the decision to the Director. The recommended decision shall include: (1) A statement containing a description of the history of the proceedings; (2) Findings on the issues of fact with the reasons therefor; and

areas affected, and the species affected. In the case of a temporary suspension, the date and time when the harvest may be resumed will also be provided by local notification to the public and by publication in the Federal Register as provided for in paragraphs (a) and (b) of this section. [68 FR 43028, July 21, 2003]

(2) Boarding shutdown valves (BSDV) and their actuators. For subsea wells, the BSDV is the surface equivalent of an SSV on a surface well; (3) Underwater safety valves (USV) and actuators; (4) Subsurface safety valves (SSSV) and associated safety valve locks and landing nipples; and (5) Gas lift shutdown valves (GLSDV) and their actuators associated with subsea systems.

(3) After BOEM cancels your permit or you relinquish it, you are still responsible for proper abandonment of any drill sites in accordance with the requirements of 30 CFR 251.7(b)(8). You must also comply with all other obligations specified in this part or in the permit.

In this section, “you” means the applicant and “we” or “us” means the regulatory authority. (a) If you have previously applied for a permit and the required information is already in AVS, then you may update the information as shown in the following table. Open Table

(a) Each application shall contain descriptions, including appropriate maps and cross section drawings, of the proposed disposal site and design of the spoil disposal structures according to 30 CFR 816.71-816.74. These plans shall describe the geotechnical investigation, design, construction, operation, maintenance, and removal, if appropriate, of the site and structures. (b) Except for the disposal of excess spoil on pre existing

(2) Signs shall show the name, business address, and telephone number of the person who conducts the surface mining activities and the identification number of the current permit authorizing surface mining activities. (3) Signs shall be retained and maintained until after the release of all bonds for the permit area. (d) Perimeter markers. The perimeter of a permit area shall be

placement by the natural segregation of dumped materials, provided the resulting underdrain system is capable of carrying anticipated seepage of water due to rainfall away from the excess spoil fill and from seeps and springs in the foundation of the disposal area and the other requirements for drainage control are met. (f) Surface water runoff from areas adjacent to and above the fill is not allowed to flow onto the fill and is diverted into stabilized diversion channels

placement by the natural segregation of dumped materials, provided the resulting underdrain system is capable of carrying anticipated seepage of water due to rainfall away from the excess spoil fill and from seeps and springs in the foundation of the disposal area and the other requirements for drainage control are met. (f) Surface water runoff from areas adjacent to and above the fill is not allowed to flow onto the fill and is diverted into stabilized diversion channels