1243    3250 1250    3251 1251    3252 1252   1The first two digits identify the bank's Federal Reserve District. For example, 01 identifies the First Federal Reserve District (Boston), and 12 identifies the Twelfth

(a) In order to allow for variations incident to proper grading and handling, the tolerances in Tables I, II, and III of this section are provided. Table I—Tolerances [Percent] Open Table

2Per cent of full range. 3This column applies to aircraft manufactured after October 11, 1991. 4For all aircraft manufactured on or after December 6, 2010, the sampling interval per second is 4. [Doc. No. 25530, 53 FR 26152, July 11, 1988; 53 FR 30906, Aug. 16, 1988, as amended by Amdt. 135-69

*Where ET means “thermal efficiency” and EC means “combustion efficiency” as defined in 10 CFR 431.82. **Prior to March 2, 2022, for natural draft very large gas-fired steam commercial packaged boilers, a minimum thermal efficiency level of 77 percent is permitted and meets Federal

of time from the Secretary of Transportation for consideration of the application.

) OMB has approved the collections of information contained in FHFA's regulations and has assigned each collection a control number. The following table displays the sections of FHFA's regulations (both those located in this chapter and those promulgated by the former Federal Housing Finance Board that appear in chapter IX of this title) containing collections of information, along with the applicable OMB control numbers and the expirations dates for those control numbers:

base, and in some cases, cracks may progress from the defect into either or both adjoining rail ends. If the weld defect progresses longitudinally through the weld section, the defect is considered a split web for purposes of remedial action required by this section. (7) Detail fracture means a progressive fracture originating at or near the surface of the rail head. These fractures should not be confused with transverse

(a) Name. The name of the viticultural area described in this section is “Upper Hiwassee Highlands”. For purposes of part 4 of this chapter, “Upper Hiwassee Highlands” is a term of viticultural significance. (b) Approved maps. The 24 United States Geological Survey (USGS) 1:24,000 scale topographic maps used to determine the boundary of the Upper Hiwassee

pursuant to § 5.5(a)(3)(ii) shall be preserved by the Federal agency for a period of 3 years from the date of completion of the contract and shall be produced at the request of the Department of Labor at any time during the 3-year period. (3) The Federal agency shall cause such investigations to be made as may be necessary to assure compliance with the

Agreement") are effective in disciplining the use of subsidies and in remedying the adverse effects of subsidies, and (2) to ensure that part IV of the Subsidies Agreement does not undermine the benefits derived from any other part of that Agreement. (b) Specific objectiveThe specific objective of the United States under this subchapter shall be to create a mechanism which will provide for an ongoing review of the

subpart A of this part for— (i) The needs of the private school; or (ii) The general needs of children in the private school. (Authority: 20 U.S.C. 6320(a),

enclosed by the coaming required under this paragraph must have— (i) A means of draining or removing oil from the enclosed deck area without discharging oil into the water; and (ii) A mechanical means of closing each drain and scupper in the enclosed deck-area. (4) For a tankship, as defined in

′31″ W, east towards the jetties. (b) Regulations. (1) Entry of into these zones is prohibited except for the following: (i) Commercial vessels operating at waterfront facilities within these zones; (ii) Commercial vessels transiting directly to or from waterfront facilities within these zones;

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.

part 1910, which have been identified as also applicable to construction work. This republication developed a single set of OSHA regulations for both labor and management forces within the construction industry. 2. Nomenclature changes to part 1926 appear at 84 FR 21597, May 14, 2019.