.[25] EPA ultimately concluded that the standards set in 2012 for MYs 2022-2025 were no longer appropriate.[26] For NHTSA, in turn, the “augural” CAFE standards for MYs 2022-2025 were never final, and as explained in the 2012 final rule, NHTSA was obligated from the beginning to undertake a new rulemaking to set CAFE standards for MYs 2022-2025. The NPRM thus began the

.[25] EPA ultimately concluded that the standards set in 2012 for MYs 2022-2025 were no longer appropriate.[26] For NHTSA, in turn, the “augural” CAFE standards for MYs 2022-2025 were never final, and as explained in the 2012 final rule, NHTSA was obligated from the beginning to undertake a new rulemaking to set CAFE standards for MYs 2022-2025. The NPRM thus began the

SUPPLEMENTARY INFORMATION: Background This document includes proposed amendments to the Income Tax Regulations (26 CFR part 1) under section 401(a)(9) of the Internal Revenue Code (Code) regarding the requirement to take required minimum distributions from qualified trusts. These proposed regulations also apply with respect to the

SUPPLEMENTARY INFORMATION: I. Background On November 26, 2019, SBA published the first comprehensive revision of the HUBZone Program regulations since the program's implementation more than 20 years ago. 84 FR 65222. The revisions were intended to clarify current HUBZone Program policies and procedures and implement changes to make the

B.5 Constant Controls Cost Forecast B.6 Constant Controls Forecast Profit and Loss Summary for the Profit Protection Test B.7 Profit Protection Test C.1 Constant Controls Forecast Profit and Loss Summary for the Rate of Return Test C.2 Constant Controls

sections 2431 to 2431h and 2431k of this title, enacting provisions set out as notes under this section and section 2431b of this title, and amending provisions set out as a note under this section] may be cited as the 'Tropical Forest Conservation Reauthorization Act of 2018'." Pub. L. 115–428, §1

DATES: Comments must be received on or before August 26, 2019. Under the Paperwork Reduction Act (PRA), comments on the information collection provisions are best assured of consideration if the Office of Management and Budget (OMB) receives a copy of your comments on or before July 26, 2019. ADDRESSES:

WHIP but were covered by a grant program administered by the State of Florida. WHIP+ will be available for eligible farms located in counties that received a qualifying Presidential Emergency Disaster Declaration or Secretarial Disaster Designation due to one or more of the qualifying disaster events or a related condition. Only producers in primary disaster counties qualify for WHIP+ based on the declaration or designation. However, producers in

1. Proposed Rule Amendment 2. Comments on the Proposed Rule Amendment 3. Final Rule Amendment E. Resubmission Thresholds

Malignant granular cell tumor Alveolar soft part sarcoma Epithelioid sarcoma Clear cell sarcoma of tendons and aponeuroses Extraskeletal Ewing's sarcoma Congenital and infantile fibrosarcoma Malignant

. (ii) One year prior to date of receipt of a supplemental claim. [26 FR 1593, Feb. 24, 1961]

. Category 5. Insulation Boards, Panels and Pipe Covers These goods have to be classified according to their composition and presentation. For example, if the insulation materials are made of polyurethane, polystyrene, polyolefin and phenolic plastics, then they may be classified Chapter 39, for “Plastics and articles thereof”. The exact description of the products at issue is necessary before a classification can

   Chloride (see Tables 1A, 2A, 3) 4.2   Hydrocarbon Characterization. Characterization of hydrocarbon refrigerants (Tables 1B and 2B) and contaminants are listed in the following general classifications: 4.2.1   Nominal composition 4.2.2   Other allowable impurities 4.2.3   Air and other non-condensables 4.2.4   Sulfur odor

§86.113-04(a)(1). [64 FR 23925, May 4, 1999, as amended at 65 FR 6865, Feb. 10, 2000; 65 FR 59976, Oct. 6, 2000; 71 FR 2837, Jan. 17, 2006; 71 FR 51489, Aug. 30, 2006; 72 FR 8566, Feb. 26, 2007; 75 FR 66457, Oct. 28, 2010; 76 FR 57378, Sept. 15, 2011; 78 FR 36388, June 17, 2013; 79 FR 23730, Apr. 28, 2014; 80 FR 9109, Feb. 19, 2015; 81 FR 73991, Oct. 25, 2016]

X Ozone Season Group 1 allowances to the Indian country new unit set-aside for such control period. [76 FR 48379, Aug. 8, 2011, as amended at 79 FR 71672, Dec. 3, 2014; 81 FR 74609, Oct. 26, 2016]

Flare stack emissions means CO2 and N2O from partial combustion of hydrocarbon gas sent to a flare plus CH4 emissions resulting from the incomplete combustion of hydrocarbon gas in flares. Forced extraction of natural gas liquids

will send written notification to the appropriate government official indicating that no summary was submitted, and may also take enforcement action against the exporter. [58 FR 9085, Feb. 18, 1993, as amended at 69 FR 23117, Apr. 28, 2004; 71 FR 35546, June 21, 2006; 72 FR 61029, Oct. 26, 2007]

Factor of safety (Safety factor) means the ratio of the forces tending to resist the failure of a structure to the forces tending to cause such failure as determined by accepted engineering practice. Fault means a fracture or a zone of fractures in any material along which strata on one side have been displaced with respect to that on the other side.

importer or receiving facility bears no responsibility. (4) The periods of retention referred to in this section are extended automatically during the course of any unresolved enforcement action regarding the regulated activity or as requested by the Administrator. [45 FR 33142, May 19, 1980, as amended at 83 FR 60901, Dec. 26, 2017]

treatment standards for the waste contaminating the debris. [57 FR 37277, Aug. 18, 1992, as amended at 59 FR 48103, Sept. 19, 1994; 63 FR 28738, May 26, 1998; 71 FR 40279, July 14, 2006]

28.660 Total suspended solids 20.050 9.536 pH (1) (1)

within ±5 °C in the range of 100-250 °C. 6.3   Equipment for sample extraction. 6.3.1   Vials—Glass, 25 mL and 4 mL, with Teflon-lined screw caps, baked at 200-250 °C for 1-h minimum prior to use. 6.3.2   Gas-tight syringes—Glass, various sizes, 0.5 mL to 2.5 mL (if spiking of drilling fluids with oils is to occur). 6.3.3   Auto pipetters—various sizes, 0.1 mL

3Within the range of 7.0 to 10.0 at all times. (g) Mold Cooling Operations. BPT Effluent Limitations Open Table