Part 261 — Identification and Listing of Hazardous Waste
Subpart A — General
- § 261.1— Purpose and scope.
- § 261.2— Definition of solid waste.
- § 261.3— Definition of hazardous waste.
- § 261.4— Exclusions.
- § 261.6— Requirements for recyclable materials.
- § 261.7— Residues of hazardous waste in empty containers.
- § 261.8— PCB wastes regulated under Toxic Substance Control Act.
- § 261.9— Requirements for Universal Waste.
Subpart B — Criteria for Identifying the Characteristics of Hazardous Waste and for Listing Hazardous Waste
Subpart C — Characteristics of Hazardous Waste
Subpart D — Lists of Hazardous Wastes
- § 261.30— General.
- § 261.31— Hazardous wastes from non-specific sources.
- § 261.32— Hazardous wastes from specific sources.
- § 261.33— Discarded commercial chemical products, off-specification species, container residues, and spill residues thereof.
- § 261.35— Deletion of certain hazardous waste codes following equipment cleaning and replacement.
Subpart E — Exclusions/Exemptions
- § 261.39— Conditional Exclusion for Used, Broken Cathode Ray Tubes (CRTs) and Processed CRT Glass Undergoing Recycling.
- § 261.40— Conditional Exclusion for Used, Intact Cathode Ray Tubes (CRTs) Exported for Recycling.
- § 261.41— Notification and Recordkeeping for Used, Intact Cathode Ray Tubes (CRTs) Exported for Reuse.
Subpart H — Financial Requirements for Management of Excluded Hazardous Secondary Materials
- § 261.140— Applicability.
- § 261.141— Definitions of terms as used in this subpart.
- § 261.142— Cost estimate.
- § 261.143— Financial assurance condition.
- § 261.147— Liability requirements.
- § 261.148— Incapacity of owners or operators, guarantors, or financial institutions.
- § 261.149— Use of State-required mechanisms.
- § 261.150— State assumption of responsibility.
- § 261.151— Wording of the instruments.
Subpart I — Use and Management of Containers
- § 261.170— Applicability.
- § 261.171— Condition of containers.
- § 261.172— Compatibility of hazardous secondary materials with containers.
- § 261.173— Management of containers.
- § 261.175— Containment.
- § 261.176— Special requirements for ignitable or reactive hazardous secondary material.
- § 261.177— Special requirements for incompatible materials.
- § 261.179— Air emission standards.
Subpart J — Tank Systems
- § 261.190— Applicability.
- § 261.191— Assessment of existing tank system's integrity.
- § 261.193— Containment and detection of releases.
- § 261.194— General operating requirements.
- § 261.196— Response to leaks or spills and disposition of leaking or unfit-for-use tank systems.
- § 261.197— Termination of remanufacturing exclusion.
- § 261.198— Special requirements for ignitable or reactive materials.
- § 261.199— Special requirements for incompatible materials.
- § 261.200— Air emission standards.
Subpart M — Emergency Preparedness and Response for Management of Excluded Hazardous Secondary Materials
- § 261.400— Applicability.
- § 261.410— Preparedness and prevention.
- § 261.411— Emergency procedures for facilities generating or accumulating 6000 kg or less of hazardous secondary material.
- § 261.420— Contingency planning and emergency procedures for facilities generating or accumulating more than 6,000 kg of hazardous secondary material or receiving ignitable spent refrigerants
Subpart AA — Air Emission Standards for Process Vents
Subpart BB — Air Emission Standards for Equipment Leaks
- § 261.1050— Applicability.
- § 261.1051— Definitions.
- § 261.1052— Standards: Pumps in light liquid service.
- § 261.1053— Standards: Compressors.
- § 261.1054— Standards: Pressure relief devices in gas/vapor service.
- § 261.1055— Standards: Sampling connection systems.
- § 261.1056— Standards: Open-ended valves or lines.
- § 261.1057— Standards: Valves in gas/vapor service or in light liquid service.
- § 261.1058— Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors.
- § 261.1059— Standards: Delay of repair.
- § 261.1060— Standards: Closed-vent systems and control devices.
- § 261.1061— Alternative standards for valves in gas/vapor service or in light liquid service: percentage of valves allowed to leak.
- § 261.1062— Alternative standards for valves in gas/vapor service or in light liquid service: skip period leak detection and repair.
- § 261.1063— Test methods and procedures.
- § 261.1064— Recordkeeping requirements.
Subpart CC — Air Emission Standards for Tanks and Containers
- § 261.1080— Applicability.
- § 261.1081— Definitions.
- § 261.1082— Standards: General.
- § 261.1083— Material determination procedures.
- § 261.1084— Standards: tanks.
- § 261.1086— Standards: containers.
- § 261.1087— Standards: Closed-vent systems and control devices.
- § 261.1088— Inspection and monitoring requirements.
- § 261.1089— Recordkeeping requirements.