Part 58 — Main and Auxiliary Machinery and Related Systems
Subpart 58.01 — General Requirements
- § 58.01-1— Scope.
- § 58.01-5— Applicable standards.
- § 58.01-10— Fuel oil.
- § 58.01-20— Machinery guards.
- § 58.01-25— Means of stopping machinery.
- § 58.01-30— Trial-trip observance.
- § 58.01-35— Main propulsion auxiliary machinery.
- § 58.01-40— Machinery, angles of inclination.
- § 58.01-45— Machinery space, ventilation.
- § 58.01-50— Machinery space, noise.
- § 58.01-55— Tanks for flammable and combustible oil.
Subpart 58.03 — Incorporation of Standards
Subpart 58.05 — Main Propulsion Machinery
Subpart 58.10 — Internal Combustion Engine Installations
Subpart 58.16 — Liquefied Petroleum Gases for Cooking and Heating
- § 58.16-1— Scope.
- § 58.16-5— Definition.
- § 58.16-7— Use of liquefied petroleum gas.
- § 58.16-10— Approvals.
- § 58.16-15— Valves and safety relief devices.
- § 58.16-16— Reducing regulators.
- § 58.16-17— Piping and fittings.
- § 58.16-18— Installation.
- § 58.16-19— Tests.
- § 58.16-20— Ventilation of compartments containing gas-consuming appliances.
- § 58.16-25— Odorization.
- § 58.16-30— Operating instructions.
- § 58.16-35— Markings.
Subpart 58.20 — Refrigeration Machinery
Subpart 58.25 — Steering Gear
- § 58.25-1— Applicability.
- § 58.25-5— General.
- § 58.25-10— Main and auxiliary steering gear.
- § 58.25-15— Voice communications.
- § 58.25-20— Piping for steering gear.
- § 58.25-25— Indicating and alarm systems.
- § 58.25-30— Automatic restart.
- § 58.25-35— Helm arrangements.
- § 58.25-40— Arrangement of the steering-gear compartment.
- § 58.25-45— Buffers.
- § 58.25-50— Rudder stops.
- § 58.25-55— Overcurrent protection for steering-gear systems.
- § 58.25-60— Non-duplicated hydraulic rudder actuators.
- § 58.25-65— Feeder circuits.
- § 58.25-70— Steering-gear control systems.
- § 58.25-75— Materials.
- § 58.25-80— Automatic pilots and ancillary steering gear.
- § 58.25-85— Special requirements for tank vessels.
Subpart 58.30 — Fluid Power and Control Systems
- § 58.30-1— Scope.
- § 58.30-5— Design requirements.
- § 58.30-10— Hydraulic fluid.
- § 58.30-15— Pipe, tubing, valves, fittings, pumps, and motors.
- § 58.30-20— Fluid power hose and fittings.
- § 58.30-25— Accumulators.
- § 58.30-30— Fluid power cylinders.
- § 58.30-35— Testing.
- § 58.30-40— Plans.
- § 58.30-50— Requirements for miscellaneous fluid power and control systems.
Subpart 58.50 — Independent Fuel Tanks
Subpart 58.60 — Industrial Systems and Components on Mobile Offshore Drilling Units (MODU)
- § 58.60-1— Applicability.
- § 58.60-2— Alternatives and substitutions.
- § 58.60-3— Pressure vessel.
- § 58.60-5— Industrial systems: Locations.
- § 58.60-7— Industrial systems: Piping.
- § 58.60-9— Industrial systems: Design.
- § 58.60-11— Analyses, plans, diagrams and specifications: Submission.
- § 58.60-13— Inspection.