Part 178 — Specifications for Packagings
Subpart B — Specifications for Inside Containers, and Linings
- § 178.33-1— Compliance.
- § 178.33-2— Type and size.
- § 178.33-3— Inspection.
- § 178.33-4— Duties of inspector.
- § 178.33-5— Material.
- § 178.33-6— Manufacture.
- § 178.33-7— Wall thickness.
- § 178.33-8— Tests.
- § 178.33-9— Marking.
- § 178.33a-1— Compliance.
- § 178.33a-2— Type and size.
- § 178.33a-3— Inspection.
- § 178.33a-4— Duties of inspector.
- § 178.33a-5— Material.
- § 178.33a-6— Manufacture.
- § 178.33a-7— Wall thickness.
- § 178.33a-8— Tests.
- § 178.33a-9— Marking.
- § 178.33b-1— Compliance.
- § 178.33b-2— Type and size.
- § 178.33b-3— Inspection.
- § 178.33b-4— Duties of inspector.
- § 178.33b-5— Material.
- § 178.33b-6— Manufacture.
- § 178.33b-7— Design qualification test.
- § 178.33b-8— Production tests.
- § 178.33b-9— Marking.
- § 178.33c-1— Compliance.
- § 178.33c-2— Variation.
- § 178.33d-1— Compliance.
- § 178.33d-2— Variation 1.
- § 178.33d-3— Variation 2.
Subpart C — Specifications for Cylinders
- § 178.35— General requirements for specification cylinders.
- § 178.36— Specification 3A and 3AX seamless steel cylinders.
- § 178.37— Specification 3AA and 3AAX seamless steel cylinders.
- § 178.38— Specification 3B seamless steel cylinders.
- § 178.39— Specification 3BN seamless nickel cylinders.
- § 178.42— Specification 3E seamless steel cylinders.
- § 178.44— Specification 3HT seamless steel cylinders for aircraft use.
- § 178.45— Specification 3T seamless steel cylinder.
- § 178.46— Specification 3AL seamless aluminum cylinders.
- § 178.47— Specification 4DS welded stainless steel cylinders for aircraft use.
- § 178.50— Specification 4B welded or brazed steel cylinders.
- § 178.51— Specification 4BA welded or brazed steel cylinders.
- § 178.53— Specification 4D welded steel cylinders for aircraft use.
- § 178.55— Specification 4B240ET welded or brazed cylinders.
- § 178.56— Specification 4AA480 welded steel cylinders.
- § 178.57— Specification 4L welded insulated cylinders.
- § 178.58— Specification 4DA welded steel cylinders for aircraft use.
- § 178.59— Specification 8 steel cylinders with porous fillings for acetylene.
- § 178.60— Specification 8AL steel cylinders with porous fillings for acetylene.
- § 178.61— Specification 4BW welded steel cylinders with electric-arc welded seam.
- § 178.65— Specification 39 non-reusable (non-refillable) cylinders.
- § 178.68— Specification 4E welded aluminum cylinders.
- § 178.69— Responsibilities and requirements for manufacturers of UN pressure receptacles.
- § 178.70— Approval of UN pressure receptacles.
- § 178.71— Specifications for UN pressure receptacles.
- § 178.74— Approval of MEGCs.
- § 178.75— Specifications for MEGCs.
Subpart H — Specifications for Portable Tanks
- § 178.255-1— General requirements.
- § 178.255-2— Material.
- § 178.255-3— Expansion domes.
- § 178.255-4— Closures for manholes and domes.
- § 178.255-5— Bottom discharge outlets.
- § 178.255-6— Loading and unloading accessories.
- § 178.255-7— Protection of valves and accessories.
- § 178.255-8— Safety devices.
- § 178.255-9— Compartments.
- § 178.255-10— Lining.
- § 178.255-11— Tank mountings.
- § 178.255-12— Pressure test.
- § 178.255-13— Repair of tanks.
- § 178.255-14— Marking.
- § 178.255-15— Report.
- § 178.273— Approval of Specification UN portable tanks.
- § 178.274— Specifications for UN portable tanks.
- § 178.275— Specification for UN Portable Tanks intended for the transportation of liquid and solid hazardous materials.
- § 178.276— Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of non-refrigerated liquefied compressed gases.
- § 178.277— Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of refrigerated liquefied gases.
Subpart J — Specifications for Containers for Motor Vehicle Transportation
- § 178.318-1— Scope.
- § 178.318-2— Container.
- § 178.318-3— Marking.
- § 178.320— General requirements applicable to all DOT specification cargo tank motor vehicles.
- § 178.337-1— General requirements.
- § 178.337-2— Material.
- § 178.337-3— Structural integrity.
- § 178.337-4— Joints.
- § 178.337-5— Bulkheads, baffles and ring stiffeners.
- § 178.337-6— Closure for manhole.
- § 178.337-7— Overturn protection.
- § 178.337-8— Openings, inlets, and outlets.
- § 178.337-9— Pressure relief devices, piping, valves, hoses, and fittings.
- § 178.337-10— Accident damage protection.
- § 178.337-11— Emergency discharge control.
- § 178.337-13— Supporting and anchoring.
- § 178.337-14— Gauging devices.
- § 178.337-15— Pumps and compressors.
- § 178.337-16— Testing.
- § 178.337-17— Marking.
- § 178.337-18— Certification.
- § 178.338-1— General requirements.
- § 178.338-2— Material.
- § 178.338-3— Structural integrity.
- § 178.338-4— Joints.
- § 178.338-5— Stiffening rings.
- § 178.338-6— Manholes.
- § 178.338-7— Openings.
- § 178.338-8— Pressure relief devices, piping, valves, and fittings.
- § 178.338-9— Holding time.
- § 178.338-10— Accident damage protection.
- § 178.338-11— Discharge control devices.
- § 178.338-12— Shear section.
- § 178.338-13— Supporting and anchoring.
- § 178.338-14— Gauging devices.
- § 178.338-15— Cleanliness.
- § 178.338-16— Inspection and testing.
- § 178.338-17— Pumps and compressors.
- § 178.338-18— Marking.
- § 178.338-19— Certification.
- § 178.345-1— General requirements.
- § 178.345-2— Material and material thickness.
- § 178.345-3— Structural integrity.
- § 178.345-4— Joints.
- § 178.345-5— Manhole assemblies.
- § 178.345-6— Supports and anchoring.
- § 178.345-7— Circumferential reinforcements.
- § 178.345-8— Accident damage protection.
- § 178.345-9— Pumps, piping, hoses and connections.
- § 178.345-10— Pressure relief.
- § 178.345-11— Tank outlets.
- § 178.345-12— Gauging devices.
- § 178.345-13— Pressure and leakage tests.
- § 178.345-14— Marking.
- § 178.345-15— Certification.
- § 178.346-1— General requirements.
- § 178.346-2— Material and thickness of material.
- § 178.346-3— Pressure relief.
- § 178.346-4— Outlets.
- § 178.346-5— Pressure and leakage tests.
- § 178.347-1— General requirements.
- § 178.347-2— Material and thickness of material.
- § 178.347-3— Manhole assemblies.
- § 178.347-4— Pressure relief.
- § 178.347-5— Pressure and leakage test.
- § 178.348-1— General requirements.
- § 178.348-2— Material and thickness of material.
- § 178.348-3— Pumps, piping, hoses and connections.
- § 178.348-4— Pressure relief.
- § 178.348-5— Pressure and leakage test.
Subpart K — Specifications for Packagings for Class 7 (Radioactive) Materials
Subpart L — Non-bulk Performance-Oriented Packaging Standards
- § 178.500— Purpose, scope and definitions.
- § 178.502— Identification codes for packagings.
- § 178.503— Marking of packagings.
- § 178.504— Standards for steel drums.
- § 178.505— Standards for aluminum drums.
- § 178.506— Standards for metal drums other than steel or aluminum.
- § 178.507— Standards for plywood drums.
- § 178.508— Standards for fiber drums.
- § 178.509— Standards for plastic drums and jerricans.
- § 178.510— Standards for wooden barrels.
- § 178.511— Standards for aluminum and steel jerricans.
- § 178.512— Standards for steel, aluminum or other metal boxes.
- § 178.513— Standards for boxes of natural wood.
- § 178.514— Standards for plywood boxes.
- § 178.515— Standards for reconstituted wood boxes.
- § 178.516— Standards for fiberboard boxes.
- § 178.517— Standards for plastic boxes.
- § 178.518— Standards for woven plastic bags.
- § 178.519— Standards for plastic film bags.
- § 178.520— Standards for textile bags.
- § 178.521— Standards for paper bags.
- § 178.522— Standards for composite packagings with inner plastic receptacles.
- § 178.523— Standards for composite packagings with inner glass, porcelain, or stoneware receptacles.
Subpart M — Testing of Non-bulk Packagings and Packages
- § 178.600— Purpose and scope.
- § 178.601— General requirements.
- § 178.602— Preparation of packagings and packages for testing.
- § 178.603— Drop test.
- § 178.604— Leakproofness test.
- § 178.605— Hydrostatic pressure test.
- § 178.606— Stacking test.
- § 178.607— Cooperage test for bung-type wooden barrels.
- § 178.608— Vibration standard.
- § 178.609— Test requirements for packagings for infectious substances.
Subpart N — IBC Performance-Oriented Standards
- § 178.700— Purpose, scope and definitions.
- § 178.702— IBC codes.
- § 178.703— Marking of IBCs.
- § 178.704— General IBC standards.
- § 178.705— Standards for metal IBCs.
- § 178.706— Standards for rigid plastic IBCs.
- § 178.707— Standards for composite IBCs.
- § 178.708— Standards for fiberboard IBCs.
- § 178.709— Standards for wooden IBCs.
- § 178.710— Standards for flexible IBCs.
Subpart O — Testing of IBCs
- § 178.800— Purpose and scope.
- § 178.801— General requirements.
- § 178.802— Preparation of fiberboard IBCs for testing.
- § 178.803— Testing and certification of IBCs.
- § 178.810— Drop test.
- § 178.811— Bottom lift test.
- § 178.812— Top lift test.
- § 178.813— Leakproofness test.
- § 178.814— Hydrostatic pressure test.
- § 178.815— Stacking test.
- § 178.816— Topple test.
- § 178.817— Righting test.
- § 178.818— Tear test.
- § 178.819— Vibration test.
Subpart P — Large Packagings Standards
- § 178.900— Purpose and scope.
- § 178.905— Large Packaging identification codes.
- § 178.910— Marking of Large Packagings.
- § 178.915— General Large Packaging standards.
- § 178.920— Standards for metal Large Packagings.
- § 178.925— Standards for rigid plastic Large Packagings.
- § 178.930— Standards for fiberboard Large Packagings.
- § 178.935— Standards for wooden Large Packagings.
- § 178.940— Standards for flexible Large Packagings.