Open Table
Deck construction Typical deck seam length factor
Continuous sheet constructionb:
5-feet wide sheets 0.2c
6-feet wide sheets 0.17
7-feet wide sheets 0.14
Panel constructiond:
5 × 7.5 feet rectangular 0.33
5 × 12 feet rectangular 0.28

aDeck seam loss applies to bolted decks only. Units for SD are feet per square feet.

b SD = 1/W, where W = sheet width (feet).

cIf no specific information is available, these factors can be assumed to represent the most common bolted decks currently in use.

d SD = (L + W)/LW, where W = panel width (feet), and L = panel length (feet).


Tried the LawStack mobile app?

Join thousands and try LawStack mobile for FREE today.

  • Carry the law offline, wherever you go.
  • Download CFR, USC, rules, and state law to your mobile device.