(a) A shield enclosing the letters “USDA” and identification letters assigned to the grader performing the service, as shown in Figure 1 to paragraph (a) of this section, constitutes a form of official identification under the regulations for preliminary grade of carcasses. This form of official identification may also be used to determine the final quality grade of carcasses; one stamp equates to “USDA Select” or “USDA Good”; two stamps placed together vertically equates to “USDA Choice”; and three stamps placed together vertically equates to “USDA Prime.”

(b) A shield enclosing the letters “USDA,” as shown in Figure 2 to paragraph (b) of this section, with the appropriate quality grade designation “Prime,” “Choice,” “Select,” “Good,” “Standard,” “Commercial,” “Utility,” “Cutter,” “Canner,” or “Cull,” as provided in the United States Standards for Grades of Carcass Beef, the United States Standards for Grades of Veal and Calf Carcasses, and the United States Standards for Grades of Lamb, Yearling Mutton, and Mutton Carcasses; and accompanied by the class designation “Bullock,” “Veal,” “Calf,” “Lamb,” “Yearling Mutton,” or “Mutton,” constitutes a form of official identification under the regulations to show the quality grade, and where necessary, the class, under said standards, of steer, heifer, and cow beef, veal, calf, lamb, yearling mutton, and mutton. The identification letters assigned to the grader performing the service will appear underneath and outside of the shield.

(c) A shield enclosing the letters “USDA” and the words “Yield Grade,” as in Figure 3 to paragraph (c) of this section, with the appropriate yield grade designation “1,” “2,” “3,” “4,” or “5” as provided in the United States Standards for Grades of Carcass Beef and the United States Standards for Grades of Lamb, Yearling Mutton, and Mutton Carcasses, constitutes a form of official identification under the regulations to show the yield grade under said standards. When yield graded, bull and bullock carcasses will be identified with the class designation “Bull” and “Bullock,” respectively. The identification letters assigned to the grader performing the service will appear underneath and outside of the shield.

(d) For combined quality and yield grade identification purposes only, a shield enclosing the letters “US” on one side and “DA” on the other, with the appropriate yield grade designation number “1,” “2,” “3,” “4,” or “5,” and with the appropriate quality grade designation of “Prime,” “Choice,” “Select,” “Good,” “Standard,” “Commercial,” “Utility,” “Cutter,” “Canner,” or “Cull,” as shown in Figure 4 to paragraph (d) of this section, constitutes a form of official identification under the regulations to show the quality and yield grade under said standards. The identification letters assigned to the grader performing the service will appear underneath and outside of the shield.

(e) Under the regulations, for yield grade identification purposes only, a shield enclosing the letters “US” on one side and “DA” on the other, and with the appropriate yield grade designation number “1,” “2,” “3,” “4,” or “5,” as shown in Figure 5 to paragraph (e) of this section, constitutes a form of official identification under the regulations to show the yield grade under said standards. The identification letters assigned to the grader performing the service will appear underneath and outside of the shield.

(f) For quality grade identification only, a shield enclosing the letters “US” on one side and “DA” on the other with the appropriate quality grade designation of “Prime,” “Choice,” “Select,” “Good,” “Standard,” “Commercial,” “Utility,” “Cutter,” “Canner,” or “Cull,” as shown in Figure 6 to paragraph (f) of this section, constitutes a form of official identification under the regulations to show the yield grade under said standards. The identification letters assigned to the grader performing the service will appear underneath and outside of the shield.

(g) As shown in Figure 7 to paragraph (g) of this section, a shield enclosing the letters “USDA” with the appropriate grade designation “1,” “2,” “3,” “4,” or “Utility,” as provided in the Official United States Standards for Grades of Pork Carcasses, constitutes a form of official identification under the regulations to show the grade under said standards of barrow, gilt, and sow pork carcasses.

(h) The following constitute forms of official identification under the regulations to show compliance of products:

(i) Figure 10 to paragraph (i) of this section, constitutes official identification to show quality system certification.

(j) Figure 11 to paragraph (j) of this section, constitutes official identification to show that products produced under USDA AMS supervision that meet specified requirements may carry the “USDA Certified” statement and/or “USDA Certified” shield, so long as each is used in direct association with a clear description of the standard or other requirement(s) to which the product claims to be certified.

(1) The “USDA Certified” shield must replicate the form and design of the example in Figure 11 and must be printed legibly and conspicuously:

(i) On a white background, with the term “USDA” in white overlaying a blue upper third of the shield and the term “Certified” in black overlaying a white middle third of the shield, with no terms in the red lower third of the shield; or

(ii) On a white or transparent background with a black trimmed shield, with the term “USDA” in white overlaying a black upper third of the shield and the term “Certified” in black overlaying the white or transparent remaining two-thirds of the shield.

(2) Use of the “USDA Certified” statement and the “USDA Certified” shield shall be approved in writing by the Director prior to use by an applicant.

(k) Figure 12 to paragraph (k) of this section, constitutes official identification to show product or services produced under an approved USDA Further Processing Certification Program (FPCP):

(1) Products produced under an approved USDA FPCP may use the “USDA Further Processing Certification Program” statement and the “USDA Further Processing Certification Program” shield; and

(2) The USDA Further Processing Certification Program shield must replicate the form and design of the example in Figure 12 to paragraph (k) of this section and must be printed legibly and conspicuously:

(i) On a white background, with the term “USDA” in white overlaying a blue upper third of the shield and the terms “USDA Further Processing Certification Program” in black overlaying a white middle third of the shield, with no terms in the red lower third of the shield; or

(ii) On a white or transparent background with a black trimmed shield, with the term “USDA” in white overlaying a black upper third of the shield and the terms “USDA Further Processing Certification Program” in black overlaying the white or transparent remaining two-thirds of the shield.

(3) Use of the “USDA Further Processing Certification Program” statement and the “USDA Further Processing Certification Program” shield shall be approved in writing by the Director prior to use by an applicant.

(l)

(1) One device used by official graders is the LP-36 Form, a rectangular, serially numbered, red tag on which a shield encloses the words “USDA Hold.” This device constitutes a form of official identification under the regulations for meat and meat products.

(2) Official graders and supervisors of grading may use “USDA Hold” tags or other methods and devices as approved by the Administrator for the identification and control of meat and meat products that are not in compliance with the regulations or are held pending the results of an examination. Any such meat or meat product identified shall not be used, moved, or altered in any manner; nor shall official control identification be removed, without the expressed permission of an authorized representative of the USDA.

[84 FR 48557, Sept. 16, 2019]